You are working on an existing server. The NIC manufacturer has notified you of an updated
driver for your card that will greatly improve performance. You download and install the new driver.
Before you reboot the system, you perform an ASR backup. When you reboot the system, it
reaches the graphical portion of the boot process and presents a STOP message. What is the
proper process for recovering from this problem?
A.
Perform an ASR restore from the ASR backup set you created before the reboot.
B.
Reboot the system, press F8 when prompted during the boot process, select Last Known
Good Configuration, and press Enter.
C.
Reinstall the operating system and do a restore of the system from tape backup.
D.
Reboot the system, press F8 when prompted during the boot process, select Safe Mode, and
press Enter.