Which criteria should you specify when you create the D…

You are a network administrator of an Active Directory domain named contoso.com.
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the DHCP Server server
role and the Network Policy Server role service installed.
You enable Network Access Protection (NAP) on all of the DHCP scopes on Server1. You need to create a
DHCP policy that will apply to all of the NAP non-compliant DHCP clients.
Which criteria should you specify when you create the DHCP policy?

A.
The client identifier

B.
The user class

C.
The vendor class

D.
The relay agent information

Explanation:

To configure a NAP-enabled DHCP server
1. On the DHCP server, click Start, click Run, in Open, type dhcpmgmt. smc, and then press ENTER.
2. In the DHCP console, open <servername>\\IPv4.
3. Right-click the name of the DHCP scope that you will use for NAP client computers, and then click
Properties.
4. On the Network Access Protection tab, under Network Access Protection Settings, choose Enable for this
scope, verify that Use default Network Access Protection profile is selected, and then click OK.
5. In the DHCP console tree, under the DHCP scope that you have selected, right-click Scope Options, and
then click Configure Options.
6. On the Advanced tab, verify that Default User Class is selected next to User class.
7. Select the 003 Router check box, and in IP Address, under Data entry, type the IP address for the default
gateway used by compliant NAP client computers, and then click Add.
8. Select the 006 DNS Servers check box, and in IP Address, under Data entry, type the IP address for each
router to be used by compliant NAP client computers, and then click Add.
9. Select the 015 DNS Domain Name check box, and in String value, under Data entry, type your organization’s
domain name (for example, woodgrovebank. local), and then click Apply. This domain is a full-access network
assigned to compliant NAP clients. 10.On the Advanced tab, next to User class, choose Default Network
Access Protection Class. 11.Select the 003 Router check box, and in IP Address, under Data entry, type the IP
address for the default gateway used by noncompliant NAP client computers, and then click Add. This can be
the same default gateway that is used by compliant NAP clients. 12.Select the 006 DNS Servers check box,
and in IP Address, under Data entry, type the IP address for each DNS server to be used by noncompliant NAP
client computers, and then click Add. These can be the same DNS servers used by compliant NAP clients.
13.Select the 015 DNS Domain Name check box, and in String value, under Data entry, type a name to identify
the restricted domain (for example, restricted. Woodgrovebank. local), and then click OK. This domain is a
restricted-access network assigned to noncompliant NAP clients.
14.Click OK to close the Scope Options dialog box.15.Close the DHCP console.
http: //technet.microsoft.com/en-us/library/dd296905%28v=ws.10%29.aspx