###BeginCaseStudy###
Case Study: 1
1Fabrikam, Inc
Overview
Fabrikam, Inc., is a pharmaceutical company located in Europe. The company has 5,000 users. The
company is finalizing plans to deploy an Exchange Server 2013 organization.
The company has offices in Paris and Amsterdam.
Existing Environment
Active Directory Environment
The network contains an Active Directory domain named fabrikam.com. An Active Directory site
exists for each office.
Network Infrastructure
The roles and location of each server are configured as shown in the following table.
Client computers run either Windows 7 or Windows 8 and have Microsoft Office 2010 installed.
The Paris office uses the 192.168.1.0/24 IP range. The Amsterdam office uses the 192.168.2.0/24 IP
range.
The offices connect to each other by using a high-speed, low-latency WAN link. Each office has a 10-
Mbps connection to the Internet.
Planned Exchange Infrastructure
The company plans to deploy five servers that run Exchange Server. The servers will be configured as
shown in the following table.
The company plans to have mailbox databases replicated in database availability groups (DAGs). The
mailbox databases and DAGs will be configured as shown in the following table.
DAG1 will use FS1 as a file share witness. DAG2 will use FS3 as a file share witness.
You plan to create the following networks on each DAG:
• A dedicated replication network named DAGNET1
• A MAPI network named DAGNET2
All replication traffic will run on DAGNET1. All client connections will run on DAGNET2. Client
connections must never occur on DAGNET1. Replication traffic must only occur on DAGNET2 if
DAGNET1 is unavailable.
Each Exchange Server 2013 Mailbox server will be configured to have two network adapters.
The following two mailbox databases will not be replicated as part of the DAGs:
• A mailbox database named AccountingDB that is hosted on EX1
• A mailbox database named TempStaffDB that is hosted on EX4
EDGE1 will have an Edge Subscription configured, with both EX1 and EX2 as targets.
Requirements
Planned Changes
An external consultant reviews the Exchange Server 2013 deployment plan and identifies the
following areas of concern:
• The DAGs will not be monitored.
• Multiple Edge Transport servers are required to prevent the potential for a single point of
failure.
Technical Requirements
Fabrikam must meet the following technical requirements:
• Email must be evaluated for SPAM before the email enters the internal network.
• Production system patching must minimize downtime to achieve the highest possible service
to users.
• Users must be able to use the Exchange Control Panel to autonomously join and disjoin their
department’s distribution lists.
• Users must be able to access all Internet-facing Exchange Server services by using the names
of mail.fabrikam.com and autodiscover.fabrikam.com.
The company establishes a partnership with another company named A. Datum Corporation. A.
Datum uses the SMTP suffix adatum.com for all email addresses. Fabrikam plans to exchange
sensitive information with A. Datum and requires that the email messages sent between the two
companies be encrypted. The solution must use Domain Security.
Users in the research and development (R&D) department must be able to view only the mailboxes
of the users in their department from Microsoft Outlook. The users in all of the other departments
must be prevented from viewing the mailboxes of the R&D users from Outlook.
Administrators plan to produce HTML reports that contain information about recent status changes
to the mailbox databases.
Fabrikam is evaluating whether to abort its plan to implement an Exchange Server 2010 Edge
Transport server and to implement a Client Access server in the Paris office instead. The Client
Access server will have anti-spam agents installed.
###EndCaseStudy###
HOTSPOT
You need to recommend which configurations must be set for each network.
Which configurations should you recommend?
To answer, select the appropriate configurations for each network in the answer area.
Answer: 
Passed 70-341 yesterday with a score of 855. Around 10 new questions on Aplit Permissions, DAG Setup and so on. Got 3 Scenarios: Litware, Proseware, Trey Research. All new questions have been updated in PassLeader new 70-341 dumps (http://www.passleader.com/70-341.html).
I Agree:
Disabling replication for the MAPI network doesn’t guarantee that the system won’t use the MAPI network for replication. When all configured replication networks are offline, failed, or otherwise unavailable, and only the MAPI network remains (which is configured as disabled for replication), the system uses the MAPI network for replication.
https://technet.microsoft.com/en-us/library/dd298065(v=exchg.150).aspx#Dat
I passed the test today with an 820. I, just as SRINIVAS said, had 10 new questions and then 5 that were similar to some but worded different. Same thing with them being on split permissions vs AD permissions and also on Active Sync logs. Had the same three scenarios as well. 3 scenarios with 4 questions each and then 38 questions. I can not say if “Pass Leader” has the new questions or not though.
New 70-341 Exam Questions and Answers Updated Recently (15/Aug/2016):
NEW QUESTION 243
You have an Exchange Server 2013 organization that contains the servers configured as shown in the following table.
Image URL: examgod.com/plimages/109f6fbf8b00_C7D6/70-341-vce-pdf-dumps-2431_thumb.jpg
All inbound messages from the Internet are received by EX1 and EX2. You notice several communication errors between Subnet1 and Subnet2. Another administrator is working to resolve the communication errors. You need to identify if email delivery to the organization fails due to the communication errors by monitoring the inbound TCP ports in Subnet2. Which port should you monitor?
A. 25
B. 475
C. 587
D. 2525
Answer: A
NEW QUESTION 244
You have an Exchange Server 2013 organization that contains five servers. The organization contains 5,000 mailboxes. One hundred users plan to leave your company during the next 48 hours to run a new company named Fabrikam, Inc. The mailboxes of the 100 users are in a mailbox database named DB5. The deleted item retention setting for DB5 is two days. You need to implement a solution to meet the following security requirements:
– The 100 users must be prevented from permanently deleting any email messages from their mailbox.
– In 48 hours, you must create a copy of only the email messages that contain the word “Fabrikam”.
– The solution must be implemented as quickly as possible.
What should you do?
A. Modify the deleted item retention period for DB5, and then run the New-MailboxSearch cmdlet in 48 hours.
B. Modify the deleted item retention period for the 100 mailboxes, and then run the New-MailboxSearch cmdlet in 48 hours.
C. Modify the deleted item retention period for DB5, and then run the Search-Mailbox cmdlet in 48 hours.
D. Enable Single Item Recovery for the 100 mailboxes, and then run the New-MailboxSearch cmdlet in 48 hours.
Answer: C
Explanation:
Not A. New-MailboxSearch alone will just create a search.
You would need to run the Start-MailboxSearch cmdlet to actually run the search.
technet.microsoft.com/en-us/library/ee364752(v=exchg.150).aspx
technet.microsoft.com/en-us/library/dd298173(v=exchg.160).aspx
NEW QUESTION 245
Hotspot Question
You have an Exchange Server 2013 organization and a Microsoft Office 365 tenant that are configured for hybrid coexistence. Fight hundred users have mailboxes in the Exchange Server 2013 organization. Six hundred users have mailboxes in Office 365. You need to implement a mailbox solution for the support department. The solution must meet the following reguirements:
– All users must be able to send email messages to a dedicated mailbox for support.
– All of the users from the support department must be able to log on to the dedicated support mailbox and read the email messages in the mailbox.
– All of the users from the support department must be able to reply to the email messages sent to the dedicated support mailbox. The replies must identify to the name of the user replying.
– Must apply the principle of least privileges.
What should you do? To answer, select the appropriate options in the answer area.
Image URL: examgod.com/plimages/109f6fbf8b00_C7D6/70-341-vce-pdf-dumps-2451_thumb.jpg
Answer:
Image URL: examgod.com/plimages/109f6fbf8b00_C7D6/70-341-vce-pdf-dumps-2452_thumb.png
NEW QUESTION 246
You plan lo deploy three Exchange Server 2013 servers. Each server has eight 1-TB internal hard disk drives for mailbox database storage. All of the mailbox databases will replicate to all of the servers. You need to recommend a disk configuration for the servers that meets the following reguirements:
– Users must be able to access their mailbox if a single disk fails.
– The amount of space available for mailbox data must be maximized.
Which disk configuration should you use on each server?
A. JBOD
B. RAID 5
C. RAID 1
D. RAID 10
Answer: B
NEW QUESTION 247
Your network contains an Active Directory forest named contoso.com. The forest contains four sites named Site 1, Site2, Site3, and Site4. You have an Exchange Server 2013 organization that contains several servers in each site. You need to prevent users who have mailboxes in Site2 from sending email messages that are larger than 2 MB to recipients in Site3. What should you do?
A. Run the Set-ADSiteLink cmdlet.
B. Create a message classification.
C. Create a custom Send connector.
D. Run the Set-ADSite cmdlet.
Answer: A
Explanation:
technet.microsoft.com/en-us/library/bb123696(v=exchg.141).aspx
NEW QUESTION 248
Hotspot Question
You have an Exchange Server 2013 organization. All users connect to their mailbox by using a mobile device. You need to ensure that an event is written to the application log when a user attempts to connect to the organization by using a second mobile device. What command should you run? To answer, select the appropriate options in the answer area.
Image URL: examgod.com/plimages/109f6fbf8b00_C7D6/70-341-vce-pdf-dumps-2481_thumb.jpg
Answer:
Image URL: examgod.com/plimages/109f6fbf8b00_C7D6/70-341-vce-pdf-dumps-2482_thumb.jpg
Explanation:
technet.microsoft.com/en-us/library/dd298094(v=exchg.160).aspx
NEW QUESTION 249
Hotspot Question
You plan to deploy an Exchange Server 2013 organization. The security department identifies the following reguirements for the planned deployment:
– Only members of a security group named ExSecure must be able to create Exchange Server recipients.
– Only members of a security group named ExSecureAdmin must be able to manage Exchange Server organization configurations.
– Members of ExSecure and ExSecureAdmin must be able to use the Exchange Management Shell to manage Active Directory objects.
You need to identify which permission model must be used to meet each requirement. What should you identify? To answer, select the appropriate options in the answer area.
Image URL: examgod.com/plimages/109f6fbf8b00_C7D6/70-341-vce-pdf-dumps-2491_thumb.jpg
Answer:
Image URL: examgod.com/plimages/109f6fbf8b00_C7D6/70-341-vce-pdf-dumps-2492_thumb.png
Explanation:
technet.microsoft.com/en-us/library/dd638106(v=exchg.150).aspx
NEW QUESTION 250
Your company has five main offices. Each office contains a data center. You plan to deploy an Active Directory forest and an Exchange Server 2013 organization. Each office will be configured as a separate Active Directory site. User mailboxes will be hosted in each site. You need to recommend an Exchange Server 2013 deployment strategy that meets the following requirements:
– Provides redundancy for all mailbox databases
– Creates a temporary copy of outbound email messages
– Minimizes the number of servers deployed to the network
– Provides redundancy for client access by using Network Load Balancing (NLB)
What should you recommend?
A. In each site, deploy one server that has both the Mailbox server role and the Client Access server role installed and another server that has the Client Access server role installed.
B. In each site, deploy one server that has the Mailbox server role installed and two servers that have the Client Access server role installed.
C. In each site, deploy one server that has both the Mailbox server role and the Client Access server role installed.
D. In each site, deploy two servers that have both the Mailbox server role and the Client Access server role installed.
Answer: B
Explanation:
WNLB can’t be used on Exchange servers where mailbox DAGs are also being used because WNLB is incompatible with Windows failover clustering. If you’re using an Exchange 2013 DAG and you want to use WNLB, you need to have the Client Access server role and the Mailbox server role running on separate servers.
technet.microsoft.com/en-us/library/jj898588(v=exchg.150).aspx
NEW QUESTION 251
……
P.S. These New 70-341 Exam Questions Were Just Updated From The Real 70-341 Exam, You Can Get The Newest 70-341 Dumps In PDF And VCE From — https://tr.im/1banM (261q)
Good Luck !!!
BTW, NEW 70-341 PDF Dumps from Google Drive for Free: https://tr.im/1vD8Y
Passed 70-341 last week with a good score of 875!
50 questions in total:
3 Case Studies (each had 4Qs, 3*4Qs=12Qs), 38 other Mixed Qs and Drag and Drop Qs.
3 Case Studies:
1. Fabrikam, Inc.
2. Contoso, Ltd.
3. Litware, Inc.
Tips:
1. The order of answers changed a lot in my actual 70-341 test, be careful.
2. Some little changes in the hotspot screenshots to answer questions which changes the right answer, pay close attention to them.
Recommend the most valid 70-341 dumps:
http://www.passleader.com/70-341.html
(261q VCE and PDF dumps)
(All new questions were from it and wrong answers have been corrected, the most valid until now)
P.S.
Download and preview that PassLeader 70-341 dumps here:
https://doc.co/gQUBbv
Good Luck!
Passed the 70-341 test last weekend!! Scored 890!!!
Total 52 questions = 5+44+3.
Many new questions (around 8-10 new questions) appeared in my actual 70-341 test, which are not available on AIO.
Case Studies are from the following 6 FYI:
1. Case Study 1: Contoso Ltd.
2. Litware, Inc.
3. A.Datum Corporation
4. Proseware, Inc.
5. Fabrikam, Inc.
6. Trey Research
And, some Drag and Drop questions I remembered FYI:
1. Get-TransportConfig cmdlet: make a shadow copy of the message on another server/3 hours.
2. solution to ensure that users can access their mailbox by using IMAP4: Set-SendConnector cmdlet/Set-IMAPSettings cmdlet/Set-ReceiveConnector cmdlet.
3. add EX2 to DAG2: one-Add EX5 to DAG1; two-Create Mailbox database copies on EX5; 3-On EX2, remove all of the mailbox database copies; 4-Remove EX2 from DAG1; 5-On EX2 install Windows Server 2012 R2 and Exchange Server 2013
Questions on this site are sure not enough for passing, SOME NEW QUESTIONS ARE NOT AVAILABLE!
Recommend you to learn the NEWEST & VALID PassLeader 70-341 dumps here:
http://bit.ly/70-341-dumps
(IT IS THE NEWEST VERSION — 261 Q&As!!!)
Good Luck!!!