You are the Microsoft Lync administrator for a company that uses Lync Online.
The company has mandated that employees may use Lync Online to communicate with
contacts from approved external domains.
You need to configure Lync Online to allow Lync federation with only three specific domains.
You must achieve this goal by using the least amount of administrative effort.
Which two actions should you perform? Each correct answer presents part of the solution.
A.
In the Lync admin center, set the External Access option to On except for blocked
domains.
B.
In the Office 365 admin center, add the three domains to the domain list and set the
domain intent for each domain to Lync Online.
C.
In the Lync admin center, set the External Access option to Off completely.
D.
In the Lync admin center, set the External Access option to On only for allowed domains.
E.
In the Lync admin center, configure the Presence Privacy Mode option to display
presence information only to the users’ contacts.
F.
In the Lync admin center, add the three domains to the Blocked Or Allowed Domains list.
option is F
The question is asking for two actions.
Option F and D
correct
Alright everyone calm down. Justin is in the house. I’ve scored above 900 on 70-331, 70-332 and 70-346 so you know I’m going to ace this one too.
The answer is D and F.
http://social.technet.microsoft.com/wiki/contents/articles/29845.configuring-external-access-in-lync-office-365.aspx
It’s almost a year since big J smacked this one down and it still smells as good.
Hurrah The savant JJ is in the house !
OK, took the test this past week and there were 18 questions that are not included in this set of test questions as well as a handful that now have different options.
For example there’s 5 questions that all share the same set of options (a-g) that aren’t on this site.
Can you please tell about it I mean about exam?
Can you please tell me about it I mean about exam?
Hi Meche,
55 questions and a 700 to pass. There weren’t any case questions like there was on the SharePoint 2013 exams (70-331/70-332). There are a fair amount of questions on PowerShell, many of them covered on this site.
Of the 18 questions that weren’t on the site, many are similar to the questions here, but I can’t recall specific examples.
Some questions are updated and ask details about Skype for Business while others still refer to it as Lync.
I scored 602 and did not pass because of those stupid 5 set of questions that share the same answers from a) to g). Do you know where I can study those, it seems to be the problem for me… Please help
Do we have chance to get new questions here for analyzing?
All of new question in the 70-347. Would you please add the new question?
Can you please add new question. I toke exam today. 75% are new questions!!!
We need new questions soon. Hopefully, someone can help us. Please…
Failed last week in Japan. there are too many new questions.
Took exam in Japanese again today and passed. seems like this questions are still vailed in some some language.
Lots of questions are covered in this exam but some powershell new questions.
Some of them you may find via http://www.epass4sure.com/tag/70-347-exam-questions total more than 20 new questioons in my exam.
Hi Michael,
Do you know where I can study these kind of questions:
QUESTION 102
You manage an Office 365 tenant that uses an Enterprise E1 subscription.
You configure a retention policy for all mailboxes.
You must apply a new retention policy immediately because of upcoming personnel changes.
You need to ensure that the new retention policy is applied to the mailboxes immediately.
Which Windows PowerShell cmdlet should you run?
A. Enable-JournalRule
B. New-RetentionPolicyTag
C. Start-ManagedFolderAssistant
D. Set-CsUser
E. Set-CsPrivacyConfiguration
F. Set-HostedContentFilterPolicy
G. Set-MalwareFilterPolicy
H. Set-MailboxJunkEmailConfiguration
If you want to make sure that the new retention policy is applied to mailboxes immediately, you will want to run the Start-ManagedFolderAssistant cmdlet. This will immediately run the MRM functions, and any identified objects will have their retention actions applied. So the answer to your question would be C.
Can share slimier kind of questions. there are four questions regularly asking on 70-346 exam.
D and F is the correct answer.
How do I add more questions?
For example:
You deploy Office 365. All the members of a team named Sales have full access to a shared mailbox named Sales. You enable auditing for all shared mailboxes. From the Sales mailbox, an email message that contains inappropriate content is sent. You need to identify which user sent the message. What should you do?
A. From the Exchange Control Panel, run an administrator role group report. B. From Windows PowerShell, run the Get-SharingPolicy cmdlet.
C. From Windows PowerShell, run the Write-AdminAuditLog cmdlet.
D. From Windows PowerShell, run the New-MailboxAuditLogSearch cmdlet.
What is the correct answer?
D is correct
Hi Admin, could you please update 70-347 to a newer version if available ? Thanks
Failed on August 12 with 64%.
About50% new questions.
@MS, [email protected] is my email. I will like to send you 50 questions that I bought in PDF. When u get it, Can u confirm for me if those are were in your failed exam pls? whats ur email?
[email protected]
New 70-347 Exam Questions and Answers Updated Recently (7/Nov/2016):
NEW QUESTION 162
Your company is planning to migrate to Microsoft Exchange Online. The company employs 1,000 people, each with a mailbox currently located on Exchange 2010 on-premises. You estimate that it will take a minimum of four weeks to migrate all mailboxes from on-premises Exchange to Exchange Online. The company has the following migration requirements:
– During the migration, do not change the existing Microsoft Outlook profiles and .ost files used by the employees.
– Ensure that email messages sent between on-premises mailboxes and online mailboxes during the migration are secure.
– Do not send email messages between on-premises mailboxes and online mailboxes over the Internet in plain text.
You need to select the migration strategy that meets the requirements. Which migration strategy should you use?
A. Hybrid migration only
B. IMAP migration followed by staged migration
C. Staged migration only
D. Staged migration followed by remote move migration
Answer: A
Explanation:
You can use a hybrid migration to migration from Exchange 2010 to Exchange Online.
Note: In the Deployment Assistant, a hybrid deployment is when you create a new Exchange Online Exchange organization in Microsoft Office 365 for enterprises and then connect it to your existing on- premises Exchange 2010 organization by configuring Active Directory synchronization and using the Hybrid Configuration wizards.
Incorrect Answers:
B: IMAP migration is targeted at customers who may be using non-Exchange-based mail systems in their current hosted environment or have access to the data only by using the IMAP 4 protocol.
C, D: You can’t use a staged migration to migrate Exchange 2013 or Exchange 2010 mailboxes to Office 365.
support.office.com/en-us/article/Decide-on-a-migration-path-0d4f2396-9cef-43b8-9bd6-306d01df1e27?ui=en-US&rs=en-US&ad=US
NEW QUESTION 163
You need to migrate a Microsoft Exchange Server 2007 organization that has 50 mailboxes to Exchange Online by using the cutover migration method. Which two requirements should be met before you can begin the mailbox migration? Each correct answer presents part of the solution.
A. The migration administrator account must be granted Full Access permission for each on-premises mailbox that will be migrated.
B. The migration administrator account must be granted Send As permission for each on-premises mailbox that will be migrated.
C. Exchange Web Services (EWS) must be enabled and accessible from the Internet.
D. The migration administrator account must be granted Receive As permission for each on-premises mailbox that will be migrated.
E. Outlook Anywhere must be enabled and accessible from the Internet.
Answer: AE
Explanation:
A: To migrate the mailboxes, the admin must have one of the following permissions:
The migration administrator must be assigned the FullAccess permission for each on-premises mailbox.
or
The migration administrator must be assigned the Receive As permission on the on-premises mailbox database that stores user mailboxes.
E: The email migration service uses Outlook Anywhere (also known as RPC over HTTP), to connect to your on-premises Exchange Server.
support.office.com/en-us/article/Perform-a-cutover-migration-of-email-to-Office-365-9496e93c-1e59-41a8-9bb3-6e8df0cd81b4?ui=en-US&rs=en-US&ad=US
NEW QUESTION 164
All employees at a company have Exchange Online mailboxes. You have a policy that allows users to send email messages to a maximum of 500 specific recipients per message. You need to grant User1 the ability to send email messages to 700 specific recipients per message. What should you do?
A. Add the recipients to a new distribution list. Instruct User1 to send email messages to the list.
B. Run the following Windows PowerShell cmdlet:
Set-TransportConfig
C. Run the following Windows PowerShell cmdlet and apply the policy to User1:
New-ThrottlingPolicy
D. In the Exchange Admin Center, modify the mailbox properties for User1.
Answer: A
Explanation:
For distribution groups stored in an organization’s address book, the group is counted as one recipient.
Incorrect Answers:
B: The Set-TransportConfig cmdlet is usedto modify the transport configuration settings for the whole Exchange organization, not for a single user.
C: A throttlingPolicy does not refer to the number of recipients of email messages.
technet.microsoft.com/en-us/library/exchange-online-limits.aspx#RecipientLimits
NEW QUESTION 165
You manage a Microsoft SharePoint Online deployment. You create a new site collection named ContosoSites. You attempt to modify the storage quota from the SharePoint admin center, but you discover the Storage Quota option is missing. You need to ensure that the Storage Quota option is available. What should you do?
A. From the SharePoint admin center, set Site Collection Storage Management to Manual.
B. Sign in to the Office 365 admin center by using a user account that has Global administrator privileges.
C. Sign in to the SharePoint admin center by using a user account that has Global administrator privileges.
D. From the SharePoint admin center, set Site Collection Storage Management to Automatic.
Answer: B
Explanation:
To configure a resource quota for a specific site collection, perform the following steps:
1. Sign in to the Office 365 Admin Center with a user account that has SharePoint Online administrator privileges.
2. Under Admin, click SharePoint. This will open the SharePoint Admin Center.
3. Click Site Collections.
4. Select the site collection for which you want to configure the resource quota and then click Server Resource Quota.
Etc.
NEW QUESTION 166
You manage a Microsoft SharePoint Online deployment. You need to ensure that In-Place Holds only preserve files from the moment that In-Place hold was created. You open the document library settings as shown in the exhibit.
Image URL: examgod.com/plimages/175006085377_F072/passleader-70-347-dumps-1661_thumb.png
What should you do?
A. Set Create a version each time you edit a file in this document library to No versioning.
B. Set Require documents to be checked out before they can be edited to Yes.
C. Set Create a version each time you edit a file in this document library to Create major and minor (drafts) versions.
D. Set Keep the following number of major versions option to 0.
Answer: A
Explanation:
If document versioning isn’t enabled and an item is placed on hold multiple times, SharePoint preserves the version that’s current at the time each hold is placed. For example, if version 27 of an item is the most recent when the site is placed on hold the first time, and version 51 is the most recent when the site is placed on hold the second time, versions 27 and 51 are preserved.
technet.microsoft.com/en-us/library/fp161516.aspx#in_place_holds
NEW QUESTION 167
……
Case Study – Contoso, Ltd. (NEW QUESTION 174 – NEW QUESTION 180)
……
NEW QUESTION 174
You need to modify the existing environment to meet the technical requirement for Outlook on the web. Solution: You run the Set-Mailbox command. Does this meet the goal?
A. Yes
B. No
Answer: B
Explanation:
The Set-CASMailbox command, not the Set-Mailbox command, must be used to disable Outlook Web App.
This example disables Outlook Web App for the mailbox of Yan Li.
Set-CASMailbox -Identity “Yan Li” -OWAEnabled $false
From scenario: The executive management at Contoso wants to prevent users from accessing their Exchange Online mailbox by using Outlook on the web.
Note: You can use the EAC or the Shell to enable or disable Outlook Web App for a user mailbox. When Outlook Web App is enabled, a user can use Outlook Web App to send and receive email. When Outlook Web App is disabled, the mailbox will continue to receive email messages, and a user can access it to send and receive email by using a MAPI client, such as Microsoft Outlook, or with a POP or IMAP email client, assuming that the mailbox is enabled to support access by those clients.
technet.microsoft.com/en-us/library/bb124124(v=exchg.150).aspx
NEW QUESTION 175
You need to modify the existing environment to meet the technical requirement for Outlook on the web. Solution: You run the Set-OWAMailboxPolicy command. Does this meet the goal?
A. Yes
B. No
Answer: B
Explanation:
The Set-CASMailbox command, not the Set-OWAMailboxPolicy command, must be used to disable Outlook Web App.
From scenario: The executive management at Contoso wants to prevent users from accessing their Exchange Online mailbox by using Outlook on the web.
Note: You can use the EAC or the Shell to enable or disable Outlook Web App for a user mailbox. When Outlook Web App is enabled, a user can use Outlook Web App to send and receive email. When Outlook Web App is disabled, the mailbox will continue to receive email messages, and a user can access it to send and receive email by using a MAPI client, such as Microsoft Outlook, or with a POP or IMAP email client, assuming that the mailbox is enabled to support access by those clients.
technet.microsoft.com/en-us/library/bb124124(v=exchg.150).aspx
NEW QUESTION 176
You need to modify the existing environment to meet the technical requirement for Outlook on the web. Solution: You run the Set-CASMailbox command. Does this meet the goal?
A. Yes
B. No
Answer: A
Explanation:
The Set-CASMailbox command can be used to disable Outlook Web App.
This example disables Outlook Web App for the mailbox of Yan Li.
Set-CASMailbox -Identity “Yan Li” -OWAEnabled $false
From scenario: The executive management at Contoso wants to prevent users from accessing their Exchange Online mailbox by using Outlook on the web.
Note: You can use the EAC or the Shell to enable or disable Outlook Web App for a user mailbox. When Outlook Web App is enabled, a user can use Outlook Web App to send and receive email. When Outlook Web App is disabled, the mailbox will continue to receive email messages, and a user can access it to send and receive email by using a MAPI client, such as Microsoft Outlook, or with a POP or IMAP email client, assuming that the mailbox is enabled to support access by those clients.
technet.microsoft.com/en-us/library/bb124124(v=exchg.150).aspx
NEW QUESTION 177
……
P.S. These New 70-347 Exam Questions Were Just Updated From The Real 70-347 Exam, You Can Get The Newest 70-347 Dumps In PDF And VCE From — https://tr.im/1fhmc (194q)
Good Luck !!!
BTW, NEW 70-347 PDF Dumps from Google Drive for Free: https://drive.google.com/open?id=0B-ob6L_QjGLpfjdPREVKSzl1Qk92OExLdVF0RjN1QWZJdWhhbDEycFZKNzZMMUwtQ1pxeFE
Just took my 70-347 exam few days ago for the second time, finally passed!
Scored 922/1000!
Some questions were from this site, HOWEVER, some questions were reworded and changed (you’d better learn the newest 70-347 dumps).
And, the Yes/No questions and Case Studies questions that you need to think well before answering them.
DO NOT CHOOSE THE ANSWERS BEFORE THINKING CAREFULLY!!!
A lot of new questions (Skype for Business and not Lync for example).
For the newest 70-347 dumps, I recommend you to get it here:
http://www.passleader.com/70-347.html
(194q VCE and PDF)
All new Qs are available, and old Qs and wrong As have been updated, which are the most valid 70-347 dumps now!
What’s more, part of that 194Q dumps are FREE here:
https://doc.co/bz5jCS
Good Luck! Wish You Pass Exam 70-347 Luckily!!