Which deployment methods should you use?

You subscribe to Office 365. You plan to implement single sign-on. You need to deploy
Active Directory Federation Services (AD FS) to a server for the planned implementation.
Which deployment methods should you use? (Each correct answer presents a complete
solution. Choose all that apply.)

You subscribe to Office 365. You plan to implement single sign-on. You need to deploy
Active Directory Federation Services (AD FS) to a server for the planned implementation.
Which deployment methods should you use? (Each correct answer presents a complete
solution. Choose all that apply.)

A.
On a server that runs Windows Server 2008 R2, download and install AD FS 2.0.

B.
On a server that runs Windows Server 2008, download and install AD FS 2.0.

C.
On a server that runs Windows Server 2008, install the AD FS server role.

D.
On a server that runs Windows Server 2008 R2, install the AD FS server role.



Leave a Reply 27

Your email address will not be published. Required fields are marked *


Jicu Petrica

Jicu Petrica

The correct answer is : A, B

There are four versions of ADFS.

SSO for Office 365 requires AD FS 2.0 or later

AD FS 1.1 – released with Windows Server 2008 and was carried into Windows Server 2008 R2. In both editions, AD FS was installed from the Server Manager as a role. There were minimal changes from AD FS 1.0 to AD FS 1.1.
AD FS 2.0 was released after Windows Server 2008 R2. It was released to the web and is free to download. It requires at least Windows Server 2008 SP2 to install. Two versions (x86 and x64) are available for Windows Server 2008, while only the x64 version is available for Windows Server 2008 R2.
ADFS 2.1 was released to Windows Server 2012 as part of the operating system and therefore, can be installed as a Role from Server Manager.

FixyPoo

FixyPoo

Actually 5 (More if you consider the updates like Update 3)

ADFS 3.0 is a role in Server 2012 R2

joni

joni

what is the correct answer?

Smash

Smash

it’s B and D
it’s a Server role on 2k8 R2 and an install file for 2k8

FishFenly

FishFenly

I think the answer is A and B. Although you can actually install ADFS using the server role in both 2008 and 2008 R2 the version is 1.1 and 1.1 is deprecated by Microsoft. I dont think the exam would encourage installing an out of date product…

This leads me to believe its A and B.

Anyone agree or disagree?

Hans

Hans

To my opinion it should be A&B.

If you install the ADFS Server Role for Windows 2008 and R2 (answer C&D) you will have the wrong version (1.1)

J

J

should this not be in 70-346?

Justin Thompson

Justin Thompson

From the article that VicMan referenced:

AD FS has a separate installation package for the Windows Server 2008, Windows Server 2008 R2 operating system platforms (and it is commonly referred to as AD FS 2.0) or it can be installed by adding the Federation Service server role as part of the Windows Server 2012 or Windows Server 2012 R2 operating system.

Clearly A and B are the correct answers.

D@v1Z

D@v1Z

I think that is B, D, because in W2008 you need to download ADFS 2.0 to use it. You can install the role, but you have not the 2.0 version.

VERSION by OS: https://en.wikipedia.org/wiki/Active_Directory_Federation_Services

D@v1Z

D@v1Z

Forget It. Based on the wikipedia link I agree with Jicu Petrica .

A and B.

In W2008 ( W2008 and R2) V1.1 you have only default, but you can download version 2.0 for both O.S.

Regards from MadrizzZzzz…..

Andres Martinez Quesada

Andres Martinez Quesada

The AD FS server role is only available on Windows Server 2012. Correct answer is A and B, to install ADFS 2.0.

Hagag

Hagag

for the Windows Server 2008, Windows Server 2008 R2 operating system platforms (and it is commonly referred to as AD FS 2.0) or it can be installed by adding the Federation Service server role as part of the Windows Server 2012 or Windows Server 2012 R2 operating system.

Josh

Josh

Answer is: A & B.

https://technet.microsoft.com/en-us/library/dn151310.aspx

AD FS 2.0 was released after Windows Server 2008 R2. It was released to the web and is free to download. It requires at least Windows Server 2008 SP2 to install. Two versions (x86 and x64) are available for Windows Server 2008, while only the x64 version is available for Windows Server 2008 R2.

Huh

Huh

Yeah Im also asking the question about this as its a 70-346. And we got such questions in our 70-346. Will come back and tell you if I got this question in the exam.

Andrei

Andrei

Hi,

The correct answers are B and D.
Why?
Because the answers are self-explanatory.

B.
On a server that runs Windows Server 2008, download and install AD FS 2.0.
Yes, for installing the ADFS2.0 you need to donwload it and install it.

D.
On a server that runs Windows Server 2008 R2, install the AD FS server role.
Yes, for installing the ADFS SERVER ROLE – !!! it does not say which version !!!.

Mind the context and read all info available, and filter it.

Hikmat

Hikmat

Andrei check this link https://technet.microsoft.com/en-us/library/dn151310.aspx

Important:
AD FS has a separate installation package (referred to as AD FS 2.0) for the Windows Server 2008 and Windows Server 2008 R2 operating system platforms. AD FS can also be installed by adding the “Federation Service server role” as part of the Windows Server 2012 operating system.

Correct answer should be A and B

Matthias Güntert

Matthias Güntert

New 70-347 Exam Questions and Answers Updated Recently (7/Nov/2016):

NEW QUESTION 162
Your company is planning to migrate to Microsoft Exchange Online. The company employs 1,000 people, each with a mailbox currently located on Exchange 2010 on-premises. You estimate that it will take a minimum of four weeks to migrate all mailboxes from on-premises Exchange to Exchange Online. The company has the following migration requirements:
– During the migration, do not change the existing Microsoft Outlook profiles and .ost files used by the employees.
– Ensure that email messages sent between on-premises mailboxes and online mailboxes during the migration are secure.
– Do not send email messages between on-premises mailboxes and online mailboxes over the Internet in plain text.
You need to select the migration strategy that meets the requirements. Which migration strategy should you use?

A. Hybrid migration only
B. IMAP migration followed by staged migration
C. Staged migration only
D. Staged migration followed by remote move migration

Answer: A
Explanation:
You can use a hybrid migration to migration from Exchange 2010 to Exchange Online.
Note: In the Deployment Assistant, a hybrid deployment is when you create a new Exchange Online Exchange organization in Microsoft Office 365 for enterprises and then connect it to your existing on- premises Exchange 2010 organization by configuring Active Directory synchronization and using the Hybrid Configuration wizards.
Incorrect Answers:
B: IMAP migration is targeted at customers who may be using non-Exchange-based mail systems in their current hosted environment or have access to the data only by using the IMAP 4 protocol.
C, D: You can’t use a staged migration to migrate Exchange 2013 or Exchange 2010 mailboxes to Office 365.
support.office.com/en-us/article/Decide-on-a-migration-path-0d4f2396-9cef-43b8-9bd6-306d01df1e27?ui=en-US&rs=en-US&ad=US

NEW QUESTION 163
You need to migrate a Microsoft Exchange Server 2007 organization that has 50 mailboxes to Exchange Online by using the cutover migration method. Which two requirements should be met before you can begin the mailbox migration? Each correct answer presents part of the solution.

A. The migration administrator account must be granted Full Access permission for each on-premises mailbox that will be migrated.
B. The migration administrator account must be granted Send As permission for each on-premises mailbox that will be migrated.
C. Exchange Web Services (EWS) must be enabled and accessible from the Internet.
D. The migration administrator account must be granted Receive As permission for each on-premises mailbox that will be migrated.
E. Outlook Anywhere must be enabled and accessible from the Internet.

Answer: AE
Explanation:
A: To migrate the mailboxes, the admin must have one of the following permissions:
The migration administrator must be assigned the FullAccess permission for each on-premises mailbox.
or
The migration administrator must be assigned the Receive As permission on the on-premises mailbox database that stores user mailboxes.
E: The email migration service uses Outlook Anywhere (also known as RPC over HTTP), to connect to your on-premises Exchange Server.
support.office.com/en-us/article/Perform-a-cutover-migration-of-email-to-Office-365-9496e93c-1e59-41a8-9bb3-6e8df0cd81b4?ui=en-US&rs=en-US&ad=US

NEW QUESTION 164
All employees at a company have Exchange Online mailboxes. You have a policy that allows users to send email messages to a maximum of 500 specific recipients per message. You need to grant User1 the ability to send email messages to 700 specific recipients per message. What should you do?

A. Add the recipients to a new distribution list. Instruct User1 to send email messages to the list.
B. Run the following Windows PowerShell cmdlet:
Set-TransportConfig
C. Run the following Windows PowerShell cmdlet and apply the policy to User1:
New-ThrottlingPolicy
D. In the Exchange Admin Center, modify the mailbox properties for User1.

Answer: A
Explanation:
For distribution groups stored in an organization’s address book, the group is counted as one recipient.
Incorrect Answers:
B: The Set-TransportConfig cmdlet is usedto modify the transport configuration settings for the whole Exchange organization, not for a single user.
C: A throttlingPolicy does not refer to the number of recipients of email messages.
technet.microsoft.com/en-us/library/exchange-online-limits.aspx#RecipientLimits

NEW QUESTION 165
You manage a Microsoft SharePoint Online deployment. You create a new site collection named ContosoSites. You attempt to modify the storage quota from the SharePoint admin center, but you discover the Storage Quota option is missing. You need to ensure that the Storage Quota option is available. What should you do?

A. From the SharePoint admin center, set Site Collection Storage Management to Manual.
B. Sign in to the Office 365 admin center by using a user account that has Global administrator privileges.
C. Sign in to the SharePoint admin center by using a user account that has Global administrator privileges.
D. From the SharePoint admin center, set Site Collection Storage Management to Automatic.

Answer: B
Explanation:
To configure a resource quota for a specific site collection, perform the following steps:
1. Sign in to the Office 365 Admin Center with a user account that has SharePoint Online administrator privileges.
2. Under Admin, click SharePoint. This will open the SharePoint Admin Center.
3. Click Site Collections.
4. Select the site collection for which you want to configure the resource quota and then click Server Resource Quota.
Etc.

NEW QUESTION 166
You manage a Microsoft SharePoint Online deployment. You need to ensure that In-Place Holds only preserve files from the moment that In-Place hold was created. You open the document library settings as shown in the exhibit.
Image URL: examgod.com/plimages/175006085377_F072/passleader-70-347-dumps-1661_thumb.png
What should you do?

A. Set Create a version each time you edit a file in this document library to No versioning.
B. Set Require documents to be checked out before they can be edited to Yes.
C. Set Create a version each time you edit a file in this document library to Create major and minor (drafts) versions.
D. Set Keep the following number of major versions option to 0.

Answer: A
Explanation:
If document versioning isn’t enabled and an item is placed on hold multiple times, SharePoint preserves the version that’s current at the time each hold is placed. For example, if version 27 of an item is the most recent when the site is placed on hold the first time, and version 51 is the most recent when the site is placed on hold the second time, versions 27 and 51 are preserved.
technet.microsoft.com/en-us/library/fp161516.aspx#in_place_holds

NEW QUESTION 167
……

Case Study – Contoso, Ltd. (NEW QUESTION 174 – NEW QUESTION 180)
……

NEW QUESTION 174
You need to modify the existing environment to meet the technical requirement for Outlook on the web. Solution: You run the Set-Mailbox command. Does this meet the goal?

A. Yes
B. No

Answer: B
Explanation:
The Set-CASMailbox command, not the Set-Mailbox command, must be used to disable Outlook Web App.
This example disables Outlook Web App for the mailbox of Yan Li.
Set-CASMailbox -Identity “Yan Li” -OWAEnabled $false
From scenario: The executive management at Contoso wants to prevent users from accessing their Exchange Online mailbox by using Outlook on the web.
Note: You can use the EAC or the Shell to enable or disable Outlook Web App for a user mailbox. When Outlook Web App is enabled, a user can use Outlook Web App to send and receive email. When Outlook Web App is disabled, the mailbox will continue to receive email messages, and a user can access it to send and receive email by using a MAPI client, such as Microsoft Outlook, or with a POP or IMAP email client, assuming that the mailbox is enabled to support access by those clients.
technet.microsoft.com/en-us/library/bb124124(v=exchg.150).aspx

NEW QUESTION 175
You need to modify the existing environment to meet the technical requirement for Outlook on the web. Solution: You run the Set-OWAMailboxPolicy command. Does this meet the goal?

A. Yes
B. No

Answer: B
Explanation:
The Set-CASMailbox command, not the Set-OWAMailboxPolicy command, must be used to disable Outlook Web App.
From scenario: The executive management at Contoso wants to prevent users from accessing their Exchange Online mailbox by using Outlook on the web.
Note: You can use the EAC or the Shell to enable or disable Outlook Web App for a user mailbox. When Outlook Web App is enabled, a user can use Outlook Web App to send and receive email. When Outlook Web App is disabled, the mailbox will continue to receive email messages, and a user can access it to send and receive email by using a MAPI client, such as Microsoft Outlook, or with a POP or IMAP email client, assuming that the mailbox is enabled to support access by those clients.
technet.microsoft.com/en-us/library/bb124124(v=exchg.150).aspx

NEW QUESTION 176
You need to modify the existing environment to meet the technical requirement for Outlook on the web. Solution: You run the Set-CASMailbox command. Does this meet the goal?

A. Yes
B. No

Answer: A
Explanation:
The Set-CASMailbox command can be used to disable Outlook Web App.
This example disables Outlook Web App for the mailbox of Yan Li.
Set-CASMailbox -Identity “Yan Li” -OWAEnabled $false
From scenario: The executive management at Contoso wants to prevent users from accessing their Exchange Online mailbox by using Outlook on the web.
Note: You can use the EAC or the Shell to enable or disable Outlook Web App for a user mailbox. When Outlook Web App is enabled, a user can use Outlook Web App to send and receive email. When Outlook Web App is disabled, the mailbox will continue to receive email messages, and a user can access it to send and receive email by using a MAPI client, such as Microsoft Outlook, or with a POP or IMAP email client, assuming that the mailbox is enabled to support access by those clients.
technet.microsoft.com/en-us/library/bb124124(v=exchg.150).aspx

NEW QUESTION 177
……

P.S. These New 70-347 Exam Questions Were Just Updated From The Real 70-347 Exam, You Can Get The Newest 70-347 Dumps In PDF And VCE From — https://tr.im/1fhmc (194q)

Good Luck !!!

firstabed

firstabed

To install the AD FS 2.0 software on Windows Server 2008 or Windows Server 2008 R2
If your server is running Windows Server 2008 or Windows Server 2008 R2, download the AD FS 2.0 software package for your specific operating system version (either Windows Server 2008 or Windows Server 2008 R2) by saving the AdfsSetup.exe setup file onto the computer. To download this file, go to Active Directory Federation Services 2.0 RTW.
Locate the AdfsSetup.exe setup file that you downloaded to the computer, and then double-click it.
On the Welcome to the AD FS 2.0 Setup Wizard page, click Next.
On the End-User License Agreement page, read the license terms.
If you agree to the terms, select the I accept the terms in the License Agreement check box, and then click Next.
On the Server Role page, select Federation server, and then click Next.
On the Completed the AD FS 2.0 Setup Wizard page, click Finish.

https://msdn.microsoft.com/en-us/library/azure/dn151310.aspx

Answer A and B