What should you configure?

Your network contains a server named Server1 that runs Windows Server 2012. Server1
has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.

VM2 sends and receives large amounts of data over the network.
You need to ensure that the network traffic of VM2 bypasses the virtual switches of the
parent partition.
What should you configure?

A.
NUMA topology
The imagex.exe command

B.
Resource control
The ocsetup.exe command

C.
Resource metering
The setup.exe command

D.
Virtual Machine Chimney
The dism.exe command

E.
The VLAN ID

F.
Processor Compatibility

G.
The startup order
Configure the BIOS of the computer to enable PXE boot, and set the boot order so that it
is booting from the network is first.
H: Automatic start action allows you to specify what the virtual machine should do when the
host machine boots up. The options you can choose from are to automatically start the
virtual machine if it was running when the VMM service on the host stopped (the default), to
always start the virtual machine automatically, or to do nothing. You can also specify a
startup delay in seconds to reduce resource content between different virtual machines
starting up on the host.
I: Integration Services settings on virtual machines include services such as operating
system shutdown, time synchronization, data exchange, Heartbeat, and Backup (volume
snapshot services.
J: With Hyper-V Virtual Switch port mirroring you can monitor network traffic not modify the
startup order.
References:
http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/hh831410.aspx
Exam Ref 70-410, Installing and Configuring Windows Server 2012, Chapter 3: Configure
Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p. 144
Training Guide: Installing and Configuring Windows Server 2012: Chapter 7: Hyper-V
Virtualization, Lesson 2: Deploying and configuring virtual machines, p. 335
QUESTION 6
You perform a Server Core Installation of Windows Server 2012 R2 on a server named
Server1.
You need to add a graphical user interface (GUI) to Server1.
Which tool should you use?

H.
Automatic Start Action

I.
Integration Services

J.
Port mirroring
K.
Single-root I/O virtualization

G.
The startup order
Configure the BIOS of the computer to enable PXE boot, and set the boot order so that it
is booting from the network is first.
H: Automatic start action allows you to specify what the virtual machine should do when the
host machine boots up. The options you can choose from are to automatically start the
virtual machine if it was running when the VMM service on the host stopped (the default), to
always start the virtual machine automatically, or to do nothing. You can also specify a
startup delay in seconds to reduce resource content between different virtual machines
starting up on the host.
I: Integration Services settings on virtual machines include services such as operating
system shutdown, time synchronization, data exchange, Heartbeat, and Backup (volume
snapshot services.
J: With Hyper-V Virtual Switch port mirroring you can monitor network traffic not modify the
startup order.
References:
http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/hh831410.aspx
Exam Ref 70-410, Installing and Configuring Windows Server 2012, Chapter 3: Configure
Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p. 144
Training Guide: Installing and Configuring Windows Server 2012: Chapter 7: Hyper-V
Virtualization, Lesson 2: Deploying and configuring virtual machines, p. 335
QUESTION 6
You perform a Server Core Installation of Windows Server 2012 R2 on a server named
Server1.
You need to add a graphical user interface (GUI) to Server1.
Which tool should you use?

A.
NUMA topology
The imagex.exe command

B.
Resource control
The ocsetup.exe command

C.
Resource metering
The setup.exe command

D.
Virtual Machine Chimney
The dism.exe command

Explanation:
Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual
machine to maximize network throughput while minimizing network latency and the CPU
overhead required for processing network traffic.
Incorrect answers:

A: NUMA spanning is a processor setting that works by projecting a virtual NUMA topology
to the guest operating system in a way that is optimized to match the NUMA topology of the
underlying physical host machine. The effect is to provide virtual machines with additional
computing resources for high-performance server applications such as Microsoft SQL Server
and modern server operating systems such as Windows Server 2012 that include built-in
NUMA optimizations.
B: Resource control in used in the event where you need to adjust the computing resources
of a virtual machine, you can reconfigure the resources to meet the changing needs. You
can also specify resource controls to automate how resources are allocated to virtual
machines.
C: Resource metering includes:
• Average CPU usage, measured in megahertz over a period of time.
• Average physical memory usage, measured in megabytes.
• Minimum memory usage (lowest amount of physical memory).
• Maximum memory usage (highest amount of physical memory).
• Maximum amount of disk space allocated to a virtual machine.
• Total incoming network traffic, measured in megabytes, for a virtual network adapter.
• Total outgoing network traffic, measured in megabytes, for a virtual network adapter
• D: Virtual Machine Chimney or TCP Chimney Offload as it is also known, transfers
Transmission Control Protocol (TCP) traffic processing, such as packet segmentation and
reassembly processing tasks, from a computer’s CPU to a network adapter that supports
TCP Chimney Offload. Moving TCP/IP processing from the CPU to the network adapter can
free the CPU to perform more application-level functions. TCP Chimney Offload can offload
the processing for both TCP/IPv4 and TCP/IPv6 connections if supported by the network
adapter.
E: VLAN ID is used to specify a segment of the VLAN or isolate network traffic for the virtual
network adapter.
F: Processor settings is used to configure the number of virtual processors that the virtual
machine uses, enable processor compatibility to allow live migrations to hosts having a
different processor architecture, or configure the NUMA topology on a NUMA-capable host.