What is the bandwidth on the WAN interface of Router 1?
A.
16 Kbit/sec
B.
32 Kbit/sec
C.
64 Kbit/sec
D.
128 Kbit/sec
E.
512 Kbit/sec
F.
1544 Kbit/sec
What is the bandwidth on the WAN interface of Router 1?
What is the bandwidth on the WAN interface of Router 1?
According to the information above, the “show running-configuration” and “show startup-configuration” have been disabled. To view IP configuration of the LAN network connected to Router1, you can use the show ip interface command . Below is a copy of the command output:
orbitco-CCNA-pastquestions.com
From the output you can see that the IP address of the FastEthernet0/0 interface of Router1 is 192.168.10.1 and the subnet mask is /28.
If you follow the table, the increment is in 16s which is /28 or 240 mask.
Network address: 192.168.10.0
Broadcast address: 192.168.10.15 (15 = 0 + 16 -1)
So, The broadcast address for this subnet is 192.168.10.15
http://www.orbitco-ccna-pastquestions.com/ICND-1-Lab-
Show interface for the bandwith
R1#Show interfaces
FastEthernet0/0 is administratively down, line protocol is down
Hardware is MV96340 Ethernet, address is 0013.197b.1101 (bia 0013.197b.1101)
MTU 1500 bytes, BW 100000 Kbit/sec
BW = bandwidth