Refer to the exhibit.
The DHCP settings have recently been changed on the DHCP server and the client is no longer
able to reach network resources. What should be done to correct this situation?
A.
Verify that the DNS server address is correct in the DHCP pool.
B.
Ping the default gateway to populate the ARP cache.
C.
Use the tracert command on the DHCP client to first determine where the problem is located.
D.
Clear all DHCP leases on the router to prevent address conflicts.
E.
Issue the ipconfig command with the /release and /renew options in a command window.
Explanation:
Type ipconfig /release at the prompt window, press Enter, it will release the current IP configuration.
Type ipconfig /renew at the prompt window, press Enter, wait for a while, the DHCP server will assign a new IP address for your computer.
In computer networking, Fast Ethernet is a collective term for a number of Ethernet standards that carry traffic at the nominal rate of 100 Mbit/s (the original Ethernet speed was 10 Mbit/s). Of the Fast Ethernet standards, 100BASE-TX is by far the most common.
Fast Ethernet is an extension of the 10-megabit Ethernet standard. It runs on UTP data or optical fiber cable in a star wired bus topology, similar to 10BASE-T where all cables are attached to a hub. Fast Ethernet provides compatibility with existing 10BASE-T systems, enabling plug-and-play upgrades from 10BASE-T. Fast Ethernet is sometimes referred to as 100BASE-X, where “X” is a placeholder for the FX and TX variants.[3] The standard specifies the use of CSMA/CD for media access control, although in practice all modern networks use Ethernet switches and operate in full-duplex mode.