Refer to the exhibit.
The company uses EIGRP as the routing protocol. What path will packets take from a host on
192.168.10.192/26 network to a host on the LAN attached to router R1?
R3# show ip route
Gateway of last resort is not set
192 168.20.0/24 is variably subnetted, 6 subnets, 2 masks
D 192.168.20.64/26 [90/2195456] via 192.168.20.9, 00:03:31, Serial0/0
D 192.168.20.0/30 [90/2681856] via 192.168.20.9, 00:03:31, Serial0/0
C 192.168.20.4/30 is directly connected, Serial0/1
C 192.168.20.8/30 is directly connected, Serial0/0
C 192.168.20.192/26 is directly connected, FastEthernet0/0
D 192.168.20.128/26 [90/2195456] via 192.168.20.5,00:03:31, Serial0/1
A.
The path of the packets will be R3 to R2 to R1
B.
The path of the packets will be R3 to R1 to R2
C.
The path of the packets will be both R3 to R2 to R1 and R3 to R1
D.
The path of the packets will be R3 to R1
Host on the LAN attached to router R1 belongs to 192.168.10.64/26 subnet. From the output of the routing table of R3 we learn this network can be reach via 192.168.10.9, which is an IP address in 192.168.10.8/30 network (the network between R1 & R3) -> packets destined for 192.168.10.64 will be routed from R3 -> R1 -> LAN on R1.
31