The output of the show frame-relay pvc command shows “PVC STATUS = INACTIVE”. What does this
mean?
A.
The PVC is configured correctly and is operating normally, but no data packets have been
detected for more than five minutes.
B.
The PVC is configured correctly, is operating normally, and is no longer actively seeking the
address of the remote router.
C.
The PVC is configured correctly, is operating normally, and is waiting for interesting traffic to
trigger a call to the remote router.
D.
The PVC is configured correctly on the local switch, but there is a problem on the remote end of
the PVC.
E.
The PVC is not configured on the local switch.
Explanation:
The PVC STATUS displays the status of the PVC. The DCE device creates and sends the report to the
DTE devices. There are 4 statuses: ACTIVE: the PVC is operational and can transmit dataINACTIVE:
the connection from the local router to the switch is working, but the connection to the remote
router is not availableDELETED: the PVC is not present and no LMI information is being received
from the Frame Relay switch STATIC: the Local Management Interface (LMI) mechanism on the
interface is disabled (by using the “no keepalive” command). This status is rarely seen.