Which media access control method is used by Ethernet t…

Which media access control method is used by Ethernet technology to minimize collisions in the network?

A.
CSMA/CD

B.
token passing

C.
back-on algorithm

D.
full-duplex

Explanation:
Carrier Sense Multiple Access – Collision Detection (CSMA/CD) is used by Ethernet technology to minimize collisions in the network. The CSMA/CD method uses a
back-off algorithm to calculate random time for retransmission after a collision. When two stations start transmitting at the same time, their signals will collide. The
CSMA/CD method detects the collision, and both stations hold the retransmission for a certain amount of time that is determined by the back-off algorithm. This is
an effort to help ensure that the retransmitted frames do not collide.
Token passing is used by the token-ring network topology to control communication on the network.
Full-duplex is the Ethernet communication mode that allows workstation to send and receive simultaneously. With the use of full-duplex, the bandwidth of the station
can effectively be doubled. Hubs are not capable of handling full-duplex communication. You need dedicated switch ports to allow full-duplex communication.

The back-on algorithm is an invalid option. There is no such contention method.
Objective:
LAN Switching Fundamentals
Sub-Objective:
Describe and verify switching concepts

Cisco Documentation > Internetworking Technology Handbook > Ethernet Technologies