Which of these statements correctly describes the state…

Refer to the exhibit.

Which of these statements correctly describes the state of the switch once the boot process has been completed?

Refer to the exhibit.

Which of these statements correctly describes the state of the switch once the boot process has been completed?

A.
The switch will need a different IOS code in order to support VLANs and STР.

B.
Remote access management of this switch will not be possible without configuration change.

C.
As FastEthernet0/12 will be the last to come up, it will be blocked by STP.

D.
More VLANs will need to be created for this switch.



Leave a Reply 8

Your email address will not be published. Required fields are marked *


Bretty

Bretty

New 200-125 Exam Questions (5/Apr/2017 Updated):

NEW QUESTION 640
If you are configuring syslog messages specifying `logging trap warning’, which log messages will the router send?

A. 0-4
B. 0-5
C. 0-6
D. 0-2
E. 0-1

Answer: A
Explanation:
0 — emergencies System is unusable
1 — alerts Immediate action is needed
2 — critical Critical conditions exist
3 — errors Error conditions exist
4 — warnings Warning conditions exist
5 — notification Normal, but significant, conditions exist
6 — informational Informational messages
7 — debugging Debugging messages

NEW QUESTION 641
Which command can you enter to configure an IPV6 floating static route?

A. Router(config)# ipv6 route FE80:0202::/32 serail 0/1 201
B. Router(config)# ipv6 route::/0 serail0/1
C. Router(config)# ipv6 route static resolve default
D. Router(config)# ipv6 route FE80:0202::/32 serail 0/1 1

Answer: A

NEW QUESTION 642
What is true about Ethernet? (Choose two.)

A. 802.2 Protocol
B. 802.3 Protocol
C. 10BaseT half duplex
D. CSMA/CD Stops transmitting when congestion occurs
E. CSMA/CA Stops transmitting when congestion occurs

Answer: BD
Explanation:
CSMA/CD — It uses a carrier sensing scheme in which a transmitting station detects collisions by sensing transmissions from other stations while transmitting a frame. When this collision condition is detected, the station stops transmitting that frame.

NEW QUESTION 643
What are types of IPv6 static routes? (Choose three.)

A. Recursive routes
B. Directly connected routes
C. Fully specified routes
D. Advertised routes
E. Virtual links
F. Redistributed routes

Answer: ABC

NEW QUESTION 644
How to configure RIPv2? (Choose two.)

A. Enable RIP
B. Connect RIP to WAN interface
C. Enable no auto-summary
D. Enable authentication

Answer: AC

NEW QUESTION 645
What is the status of port-channel if LACP is misconfigured?

A. Forwarding
B. Enabled
C. Disabled
D. errdisabled

Answer: D

NEW QUESTION 646
What is true about DTP? (Choose three.)

A. Layer 2 protocol
B. Layer 3 protocol
C. Proprietary protocol
D. enabled by default
E. disabled by default

Answer: ACD

NEW QUESTION 647
How to create a trunk port and allow VLAN 20? (Choose three.)

A. switchport trunk encapsulation dot1q
B. switchport mode trunk
C. switchport trunk allowed vlan 20
D. switchport trunk native vlan 20

Answer: ABC

NEW QUESTION 648
What 8-bit field exists in IP packet for QoS?

A. Tos Field
B. DSCP
C. IP Precedence
D. Cos

Answer: A

NEW QUESTION 649
……

NEW QUESTION 650
If you configure syslog messages without specifying the logging trap level, which log messages will the router send?

A. 0-4
B. 0-5
C. 0-6
D. 0-2
E. 0-1

Answer: C

NEW QUESTION 651
If a router has 3 hosts connected in one port and two other hosts connected in another port, how may broadcast domains are present on the router?

A. 5
B. 2
C. 3
D. 4

Answer: B

NEW QUESTION 652
What are three parts of an IPv6 global unicast address? (Choose three.)

A. an interface ID that is used to identify the local host on the network
B. an interface ID that is used to identify the local network for a particular host
C. a subnet ID that is used to identify networks inside of the local enterprise site
D. a global routing prefix that is used to identify the network portion of the address that has been provided by an ISP
E. a global routing prefix that is used to identify the portion of the network address provided by a local administrator

Answer: ACD

NEW QUESTION 653
What are the address that will show at the show ip route if we configure the above statements? (Choose three.)

A. 10.0.0.0
B. 10.4.3.0
C. 172.15.4.0
D. 172.15.0.0
E. 192.168.4.0
F. 192.168.0.0

Answer: ADE

NEW QUESTION 654
Which feature facilitate the tagging of a specific VLAN?

A. Routing
B. Hairpinning
C. Encapsulation
D. Switching

Answer: C

NEW QUESTION 655
What does split horizon prevent?

A. routing loops, link state
B. routing loops, distance vector
C. switching loops, STP
D. switching loops, VTP

Answer: B

NEW QUESTION 656
Which value to use in HSRP protocol election process ?

A. interface
B. virtual IP address
C. priority
D. router ID

Answer: C

NEW QUESTION 657
……

Get The Newest 200-125 Dumps In PDF And VCE From — http://www.passleader.com/200-125.html (718q VCE and PDF)

Good Luck!

Ricardo Uviedo

Ricardo Uviedo

New 200-125 Exam Questions and Answers Updated Recently (25/May/2017):

NEW QUESTION 716
Which IEEE mechanism is responsible for the authentication of devices when they attempt to connect to a local network?

A. 802.1x
B. 802.11
C. 802.2x
D. 802.3x

Answer: A

NEW QUESTION 717
If router R1 knows a static route to a destination network and then learns about the same destination network through a dynamic routing protocol, how does R1 respond?

A. It refuses to advertise the dynamic route to other neighbors
B. It sends a withdrawal signal to the neighboring router
C. It disables the routing protocol
D. It prefers the static route

Answer: D

NEW QUESTION 718
Which two statements about floating static routes are true? (Choose two.)

A. They are routes to the exact /32 destination address
B. They are used when a route to the destination network is missing
C. They have a higher administrative distance than the default static route administrative distance
D. They are used as back-up routes when the primary route goes down
E. They are dynamic routes that are learned from a server

Answer: CD

NEW QUESTION 719
When you enable PortFast on a switch port, the port immediately transitions to which state?

A. Blocking
B. Forwarding
C. Learning
D. Listening

Answer: B

NEW QUESTION 720
Refer to the exhibit. If R1 receives a packet destined to 172.16.1.1, to which IP address does it send the packet?
Image URL: passleader.org/wp-content/uploads/2017/05/passleader-200-125-dumps-7201.jpg

A. 192.168.14.4
B. 192.168.12.2
C. 192.168.13.3
D. 192.168.15.5

Answer: A

NEW QUESTION 721
What is the command to see assigned address in DHCP?

A. show ip DHCP statistic
B. show ip dhcp pool
C. show ip dhcp binding
D. show ip dhcp database

Answer: C

NEW QUESTION 722
Refer to the exhibit. You determine that Computer A cannot ping Computer Which reason for the problem is most likely true?
Image URL: passleader.org/wp-content/uploads/2017/05/passleader-200-125-dumps-7221.jpg

A. The Subnet mask for computer A is incorrect
B. The default gateway address for computer A is incorrect
C. The subnet mask for computer B is incorrect
D. The default gateway address for computer B is incorrect

Answer: A

NEW QUESTION 723
Which effect of the passive-interface command on R1 is true?
Image URL: passleader.org/wp-content/uploads/2017/05/passleader-200-125-dumps-7231.jpg

A. It prevents interface Fa0/0 from sending updates.
B. Interface Fa 0/0 operates in RIPv1 mode.
C. It removes the 172.16.0.0 network from all updates on all interfaces on R1.
D. It removes the 172.16.0.0 network from all updates on all interfaces on R1.

Answer: A

NEW QUESTION 724
Which three encapsulation layers in the OSI model are combined into the TCP/IP application layer? (Choose three.)

A. Session
B. transport
C. presentation
D. application
E. data-link
F. network

Answer: ACD

NEW QUESTION 725
When is the most appropriate time to escalate an issue that you troubleshooting?

A. When you lack the proper to resolve the issue
B. When a more urgent issue that requires your intervention is detected
C. When you have gathered all information about an issue
D. When you have been unable to resolve the issue after 30 min

Answer: C

NEW QUESTION 726
Which two command can you enter to display the current time sources statistics on devices? (Choose two.)

A. Show ntp associations.
B. Show clock details.
C. Show clock.
D. Show time.
E. Show ntp status.

Answer: AE

NEW QUESTION 727
Which two authentic methods are compatible with MLPPP on a serial Interface? (Choose two.)

A. PEAP
B. CHAP
C. TACACS+
D. PAP
E. LEAP

Answer: BD

NEW QUESTION 728
Which two statements about VTP are true? (Choose two.)

A. All switches must be configured with the same VTP domain name.
B. All switches must be configured to perform trunk negotiation.
C. All switches must be configured with a unique VTP domain name.
D. The VTP server must have the highest revision number in the domain.
E. All switches must use the same VTP version.

Answer: AD

NEW QUESTION 729
Refer to the exhibit. On R1 which routing protocol is in use on the route to 192.168.10.1?

A. RIP
B. OSPF
C. IGRP
D. EIGRP

Answer: D

NEW QUESTION 730
Which two options are the best reasons to use an IPV4 private IP space? (Choose two.)

A. to enable intra-enterprise communication
B. to implement NAT
C. to connect applications
D. to conserve global address space
E. to manage routing overhead

Answer: AD

NEW QUESTION 731
Which type does a port become when it receives the best BPDU on a bridge?

A. The designated port
B. The backup port
C. The alternate port
D. The root port

Answer: D

NEW QUESTION 732
Which value can you modify to configure a specific interface as the preferred forwarding interface?

A. The interface number
B. The port priority
C. The VLAN priority
D. The hello time

Answer: B

NEW QUESTION 733
Which statement about VLAN configuration is true?

A. The switch must be in VTP server or transparent mode before you can configure a VLAN
B. The switch must be in config-vlan mode before you configure an extended VLAN
C. Dynamic inter-VLAN routing is supported on VLAN2 through VLAN 4064
D. A switch in VTP transparent mode save the VLAN databases to the running configuration only

Answer: A

NEW QUESTION 734
In which two situations should you use out-of-band management?

A. when a network device fails to forward packets
B. when you require ROMMON access
C. when management applications need concurrent access to the device
D. when you require administrator access from multiple locations
E. when the control plane fails to respond

Answer: AB

NEW QUESTION 735
What happens when an 802.11a node broadcasts within the range of an 802.11g access point?

A. The access point transmits, but the node is unable to receive.
B. A connection occurs.
C. Both the node and the access point are unable to transmit.
D. The node transmits, but the access point is unable to receive.

Answer: D

NEW QUESTION 736
Which value indicate the distance from the ntp authoritative time source?

A. priority
B. location
C. layer
D. stratum

Answer: D

NEW QUESTION 737
Which NTP type designates a router without an external reefrence clock as an authoritative time source?

A. server
B. peer
C. master
D. client

Answer: C

NEW QUESTION 738
Which 3 feature are represented by A letter in AAA? (Choose three.)

A. authorization
B. accounting
C. authentication
D. accountability
E. accessibility
F. authority

Answer: ABC

NEW QUESTION 739
When you deploy multilink PPP on your network, where must you configure the group IP Address on each device?

A. in the global config
B. Under serial interface
C. Under the routing protocol
D. Under the multilink interface

Answer: D

NEW QUESTION 740
Host is able to ping a web server but it is not able to do HTTP request.

A. ACL blocking port 23
B. ACL blocking All ports
C. ACL blocking port 80
D. ACL blocking port 443
E. None of the above

Answer: C

NEW QUESTION 741
……

P.S. These New 200-125 Exam Questions Were Just Updated From The Real 200-125 Exam, You Can Get The Newest 200-125 Dumps In PDF And VCE From — http://www.passleader.com/200-125.html (750q VCE and PDF)

Good Luck!

Andoius Anon

Andoius Anon

New 200-125 Exam Questions and Answers (8/June/2017 Updated):

NEW QUESTION 754
Which value must the device send as its username when using CHAP to authenticate with the remote peer site id:17604704 over a PPP link?

A. The automatically generated user name
B. The local host name
C. The user name defined by the administrator
D. The host name of the remote device.

Answer: B

NEW QUESTION 755
What can you change to select switch as root bridge?

A. make lower priority
B. make higher priority
C. make lower path cost
D. make higher path cost

Answer: A

NEW QUESTION 756
Refer to exhibit. What Administrative distance has route to 192.168.10.1 ?
Image URL: passleader.org/wp-content/uploads/2017/06/passleader-200-125-dumps-7561.jpg

A. 1
B. 90
C. 110
D. 120

Answer: B

NEW QUESTION 757
Which statement about IPv6 link-local addresses is true ?

A. They must be configured on all IPv6 interface
B. They must be globally unique
C. They must be manually configured
D. They are advertised globally on the network

Answer: A

NEW QUESTION 758
Which configuration can be used with PAT to allow multiple inside address to be translated to a single outside address ?

A. Dynamic Routing
B. DNS
C. Preempt
D. overload

Answer: D

NEW QUESTION 759
Which two types of information are held in the MAC address table? (Choose two)

A. MAC address
B. soure IP address
C. destination IP address
D. Protocols
E. Port numbers

Answer: AE

NEW QUESTION 760
Which command can you enter to create a NAT pool of 6 addresses?

A. Router(config)#ip nat pool test 175.17.12.69 175.17.12.74 prefix-length 24
B. Router(config)#ip nat pool test 175.17.12.69 175.17.13.74 prefix-length 16
C. Router(config)#ip nat pool test 175.17.12.66 175.17.12.72 prefix-length 8
D. Router(config)#ip nat pool test 175.17.12.69 175.17.12.76 prefix-length 8

Answer: A

NEW QUESTION 761
……

P.S. These New 200-125 Exam Questions Were Just Updated From The Real 200-125 Exam, You Can Get The Newest 200-125 Dumps In PDF And VCE From — http://www.passleader.com/200-125.html (765q VCE and PDF)

Good Luck!

Jens Milbredt

Jens Milbredt

New 200-125 Exam Questions Updated Recently (15/Aug/2017):

NEW QUESTION 795
While troubleshooting a connection problem on a computer, you determined that the computer can ping a specific web server but it cannot connect to TCP port 80 on that server. Which reason for the problem is most likely ture?

A. A VLAN number is incorrect
B. An ARP table entry is missing
C. A route is missing
D. An ACL is blocking the TCP port

Answer: D

NEW QUESTION 796
When troubleshooting Ethernet connectivity issues, how can you verify that an IP address is known to a router?

A. Check whether the IP address is in the routing table
B. Check whether an ACL is blocking the IP address
C. Check whether the IP address is in the CAM table
D. Check whether the IP address is in the ARP table

Answer: D

NEW QUESTION 797
Which two statements about IPv6 address 2002:ab10:beef::/48 are true? (Choose two.)

A. The embedded IPv4 address can be globally routed
B. It is used for an ISATAP tunnel
C. The embedded IPv4 address is an RFC 1918 address
D. The MAC address 20:02:b0:10:be:ef is embedded into the IPv6 address
E. It is used for a 6to4 tunnel

Answer: AE

NEW QUESTION 798
Which two steps must you perform on each device that is configured for IPv4 routing before you implement OSPFv3? (Choose two.)

A. configure an autonomous system number
B. configure a loopback interface
C. configure a router ID
D. enable IPv6 on an interface
E. enable IPv6 unicast routing

Answer: CE

NEW QUESTION 799
Which option is the main function of congestion management?

A. discarding excess traffic
B. queuing traffic based on priority
C. classifying traffic
D. providing long-term storage of buffered data

Answer: B

NEW QUESTION 800
Which command must you enter to enable OSPFV2 in an IPV4 network?

A. ip ospf hello-interval seconds
B. router ospfv2 process-id
C. router ospf value
D. router ospf process-id

Answer: D

NEW QUESTION 801
……

P.S. These New 200-125 Exam Questions Were Just Updated From The Real 200-125 Exam, You Can Get The Newest 200-125 Dumps In PDF And VCE From — https://www.passleader.com/200-125.html (808q VCE and PDF)

Good Luck!