Four Cisco TelePresence Server MSE 8710 blades are configured in a cluster.
When will a slave blade be restarted?
A.
only when it is explicitly restarted
B.
whenever another slave blade is restarted
C.
whenever the supervisor blade is restarted
D.
whenever the master blade is restarted
Explanation:
A slave blade will be restarted whenever the master blade is restarted. A cluster of up to four Cisco
TelePresence Server MSE 8710 blades will appear as if the blades are a single TelePresence Server. All
blades in a cluster must be of the same type and run the same version of software. However, several different
clusters can exist within an MSE chassis, such as the MSE 8000 chassis. The MSE 8000 supervisor blade
must be running software version 2.1 or higher in order to support clustering.
One blade takes the role of the master blade, and the remaining blades take the role of slave blades. The
master blade controls all cluster functions. Slave blades can manage only a few settings, such as those related
to network configuration, logging, and upgrading. In addition, the master blade inherits all of the screen licenses
allocated to the slave blades. If the supervisor blade restarts or is removed, the cluster continues to function.Cisco: Cisco TelePresence TelePresence Server 8710 and 7010 in Locally Managed Mode, Printed Help:
Understanding clustering (PDF)
New 210-065 Exam Questions and Answers Updated Recently (9/Jan/2018):
NEW QUESTION 347
Which effect of the CLI set audio aec enable command on the immersive Cisco Telepresence system is true?
A. Echo cancellation is enabled.
B. Call economy quality feature is enabled.
C. Noise cancellation is enabled.
D. AEC audio codec is enabled.
Answer: A
NEW QUESTION 348
What is the process for resetting a Cisco VCS control appliance back to initial default configuration?
A. Push down and hold the reset button on the back of the VCS appliance for 10 seconds and power cycle the device.
B. Log onto the CLI console as root and initiate the defaults-reset command.
C. Log into the GUI interface as administrator, choose System Settings, select Restore, select Factory Reset.
D. Log onto the CLI console as root and initiate the factory-reset command.
Answer: D
NEW QUESTION 349
Which two Cisco TelePresence endpoints support hosting embedded multisite conferences? (Choose two.)
A. SX20
B. MX800
C. DX70
D. DX80
E. Jabber Video for Cisco TelePresence
Answer: AB
NEW QUESTION 350
Which option is the Cisco recommended layout if cascading is being used?
A. Enhanced Continuous Presence
B. Full Participant
C. Continuous Presence
D. Active Speaker
Answer: C
NEW QUESTION 351
A Cisco EX60 is connected to the network, but users cannot make calls and the device is unregistered. The voice engineer configured the device on Cisco Unified Communications Manager. Which two options are causes of this problem? (Choose two.)
A. SIP URI is not configured correctly.
B. H.323 parameters are not configured correctly.
C. IP address is in a different subnet.
D. No user is associated to a device.
E. SIP proxy is not configured correctly.
Answer: DE
NEW QUESTION 352
Which desktop endpoint support 802.3af PoE?
A. DX70
B. DX80
C. DX90
D. DX650
Answer: D
NEW QUESTION 353
An engineer is backing up a VCS configuration. Which two methods can be used? (Choose two.)
A. FTP
B. SFTP
C. SSH
D. Web administration
E. Local
Answer: BC
NEW QUESTION 354
An engineer sees a video camera icon on the Cisco IP phone screen status line. Which meaning of this icon is true?
A. The Cisco VT camera is connected to the PC, and the PC is connected to the Cisco IP phone.
B. The Cisco IP phone has web access.
C. The Cisco IP phone is receiving a video call.
D. The Cisco IP phone is configured with video capabilities.
Answer: D
NEW QUESTION 355
When an administrator schedules a conference, which three devices are part of the process? (Choose three.)
A. Endpoint
B. Cisco Prime Collaboration Manager
C. Cisco TelePresence Management Suite
D. Cisco Communications Manager
E. MCU appliance
F. Cisco TelePresence Content Server
Answer: BDF
NEW QUESTION 356
Which option is an immersive endpoint?
A. Cisco TelePresence EX90
B. Cisco TelePresence TX9000
C. Cisco TelePresence SX10
D. Cisco TelePresence DX70
Answer: C
NEW QUESTION 357
An engineer is using a cascading feature with Cisco TelePresence Conductor and Cisco TelePresence Servers. Which two limitations will the engineer likely encounter? (Choose two.)
A. Ad-hoc conferencing cascading is not supported.
B. Only single-screen endpoints are supported through cascading links.
C. Multiple-screen endpoints are supported only with three or more Cisco TelePresence Servers.
D. Scheduled conferencing is not supported.
E. Ad-hoc conferencing cascading is supported only with three or more Cisco TelePresence Servers.
Answer: AD
NEW QUESTION 358
Which two features are available on a Cisco TelePresence Server that are not available on a Cisco TelePresence MCU? (Choose two.)
A. auto-attendant conference menu
B. automatic lecture mode
C. virtualization
D. multiscreen endpoint support
E. multiple layouts
Answer: CE
NEW QUESTION 359
While trying to register to Cisco UCM, a Cisco IP phone reports TFTP authorization failure. Which cause of this issue is true?
A. The phone has a cabling issue.
B. A firewall in the network is blocking access.
C. The TFTP address for the phone is not in the CTL file.
D. DHCP option 150 has the incorrect TFTP IP address configured.
Answer: D
NEW QUESTION 360
……
P.S. These New 210-065 Exam Questions Were Just Updated From The Real 210-065 Exam, You Can Get The Newest 210-065 Dumps In PDF And VCE From — https://www.passleader.com/210-065.html (363q VCE and PDF)
Good Luck!
What’s more, part of the new 363Q 210-065 dumps are available here:
https://drive.google.com/open?id=0B-ob6L_QjGLpfjREa25iSExKUkxvQi12aVdDMWNJSGs0T2JwYkhVUmtwdXhETmZVR3ZNek0
Best Regards!