Which of the following will a SIP endpoint use as the SIP alias when the endpoint registers with a Cisco VCS?
A.
the endpoint’s IP address
B.
the AOR
C.
the H.323 alias
D.
the registrar address
Explanation:
A Session Initiation Protocol (SIP) endpoint will use the Address of Record (AOR) as the SIP alias when the
endpoint registers with a Cisco TelePresence Video Communication Server (VCS). The AOR should be in theform of a Uniform Resource Identifier (URI). When registering, the SIP endpoint will also give its IP address to
the VCS; however, the IP address is not used as the SIP alias.
The Cisco VCS acts as the SIP server and as a SIP registrar. The SIP registrar accepts registrations only for
the domain or domains for which it is authoritative. It can also proxy registration requests to another SIP
registrar if it is configured to do so.
The SIP endpoint needs to be able to discover the SIP registrar. If the endpoint is set for automatic SIP server
discovery, the endpoint will send a REGISTER message to the SIP server that is authoritative for the endpoint’s
domain. If the endpoint is set for manual SIP server discovery, the endpoint must be configured with the IP
address or the fully qualified domain name (FQDN) of the SIP registrar. Although a SIP endpoint might use the
SIP registrar address to register, it will not use the SIP registrar address as the SIP alias.
A SIP endpoint will not use an H.323 alias as the SIP alias when the endpoint registers with a Cisco VCS.
When an H.323 endpoint registers with Cisco VCS, the endpoint sends one or more of the following aliases to
the VCS:
One or more H.323 IDs
One or more E.164 aliases
One or more Uniform Resource Identifiers (URIs)Cisco: Cisco TelePresence Video Communication Server, Administrator Guide, Software version: X8.1:
Registering aliases (PDF)
Cisco: Cisco TelePresence Video Communication Server, Administrator Guide, Software version: X8.1: About
SIP (PDF)
Cisco: Cisco TelePresence Video Communication Server, Administrator Guide, Software version: X8.1:
Configuring SIP (PDF)
2018/Jan/9 New Updated Cisco 210-065 Exam Questions:
QUESTION 334
An engineer is connecting a VISCA cable. What is the purpose of this cable?
A. to connect camera to codec
B. to connect camera to monitor
C. to connect camera to touch panel
D. to connect camera to network
Answer: A
QUESTION 335
An engineer encounters video quality issues with an endpoint.
To capture ongoing call statistics from the CLI, which command should the engineer use?
A. xStatus Call Feature Display
B. xStatus OutgoingVideoChannel Netstat 1
C. xStatus Diagnostics
D. xCommand Diagnose
Answer: C
QUESTION 336
An engineer must ensure that a user can create content playlists for Digital Signs and Show and Share. Which Cisco Digital Media Suite component allows playlists to be created?
A. Cisco DMD
B. Cisco DMM
C. Cisco TMS
D. Cisco MXE
Answer: B
QUESTION 337
Which two tools can be used to extract traces from a Cisco Unified Communications Manager server? (Choose two.)
A. RTMT
B. TraceRT
C. Wireshark
D. CLI
E. Syslog
Answer: AD
QUESTION 338
A manager requires multiparty video meetings with presentation capability. Which endpoint meets the requirement assuming there is no centralized bridge?
A. Cisco SX20
B. Cisco DX650
C. Cisco 7800
D. Cisco Jabber
Answer: D
QUESTION 339
An administrator is troubleshooting an endpoint whose SIP Registration Status shows “Failed: 403 Forbidden” and must obtain information about the cause of the failure. To which two menu locations must an engineer navigate? (Choose two.)
A. Endpoint > Log Files > messages.log
B. Endpoint > Diagnostics > Log Files > all.log
C. VCS > Maintenance > Diagnostics > Incident Reporting > View
D. VCS > Status > logs > Configuration Log
E. VCS > Status > logs > Event Log
Answer: DE
QUESTION 340
Which type of lighting is recommended for Cisco TelePresence immersive solutions?
A. point
B. reflective
C. direct
D. indirect
Answer: A
QUESTION 341
A Cisco EX60 is connected to the network, but users cannot make calls and the device is
unregistered. The voice engineer configured the device on Cisco Unified Communications
Manager. Which two options are causes of this problem? (Choose two.)
A. SIP URI is not configured correctly.
B. H.323 parameters are not configured correctly.
C. IP address is in a different subnet.
D. No user is associated to a device.
E. SIP proxy is not configured correctly.
Answer: DE
QUESTION 342
Which desktop endpoint support 802.3af PoE?
A. DX70
B. DX80
C. DX90
D. DX650
Answer: D
QUESTION 343
An engineer is backing up a VCS configuration. Which two methods can be used? (Choose two.)
A. FTP
B. SFTP
C. SSH
D. web administration
E. local
Answer: BC
QUESTION 344
An engineer sees a video camera icon on the Cisco IP phone screen status line. Which meaning of this icon is true?
A. The Cisco VT camera is connected to the PC, and the PC is connected to the Cisco IP phone.
B. The Cisco IP phone has web access.
C. The Cisco IP phone is receiving a video call.
D. The Cisco IP phone is configured with video capabilities.
Answer: D
QUESTION 345
A company just acquired a Cisco MCU 5300 for multi videoconferencing. The networking engineer must create a conference. To which tab does the engineer go to create a conference?
A. Endpoints
B. Conferences
C. Network
D. Settings
Answer: B
QUESTION 346
Which option is the Cisco recommended minimum viewing distance for a 52″ monitor installed in a video conferencing room?
A. 1.5 m
B. 3.0 m
C. 2.5 m
D. 2.0 m
Answer: A
correct: D
42” monitor: 1.5m / 4’11”
52” monitor: 2.0m / 6’6”
65” monitor: 2.5m / 8’2”
https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/misc/user_guide/video_conferencing_room_primer_ver02.pdf
And 2018 Latest Added Cisco 210-065 Exam Questions and Answers PDF More:
https://drive.google.com/drive/folders/0B75b5xYLjSSNOG12eFhPdTJkRFU?usp=sharing