Which two NAT types allow only objects or groups to reference an IP address? (Choose two)
A.
dynamic NAT
B.
dynamic PAT
C.
static NAT
D.
identity NAT
Explanation:
Adding Network Objects for Mapped Addresses
For dynamic NAT, you must use an object or group for the mapped addresses. Other NAT
types have the option of using inline addresses, or you can create an object or group
according to this section.
* Dynamic NAT:
+ You cannot use an inline address; you must configure a network object or group.
+ The object or group cannot contain a subnet; the object must define a range; the group can
include hosts and ranges.
+ If a mapped network object contains both ranges and host IP addresses, then the ranges
are used for dynamic NAT, and then the host IP addresses are used as a PAT fallback.
* Dynamic PAT (Hide):
+ Instead of using an object, you can optionally configure an inline host address or specify the
interface address.
+ If you use an object, the object or group cannot contain a subnet; the object must define a
host, or for a PAT pool, a range; the group (for a PAT pool) can include hosts and ranges.
* Static NAT or Static NAT with port translation:
+ Instead of using an object, you can configure an inline address or specify the interface
address (for static NAT-with-port-translation).
+ If you use an object, the object or group can contain a host, range, or subnet.
* Identity NAT
+ Instead of using an object, you can configure an inline address.
+ If you use an object, the object must match the real addresses you want to translate.
http://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/asa_90_cli_confi
g/ nat_objects.html#61711