Which two codecs are supported by the Cisco Unified Communications Manager software conferencing media resource?

Which two codecs are supported by the Cisco Unified Communications Manager software
conferencing media resource? (Choose two.)

Which two codecs are supported by the Cisco Unified Communications Manager software
conferencing media resource? (Choose two.)

A.
G.723

B.
G.729

C.
wideband

D.
GSM

E.
G.711

Explanation:



Leave a Reply 5

Your email address will not be published. Required fields are marked *


Victor Fraga

Victor Fraga

Wrote my Cisco 300-070 exam last weekend, and passed easily with 962/1000 points!

Got many new questions on SIP/QoS/Voice Gateways and so on, here are some new questions that I remembered:

NEW Q1
What are the two benefits of using SIP dial rules on an IP phone? (Choose two)

A. The phone can initiate dialing without sending any signaling messages to Cisco Unified CommunicationsManager.
B. The phone can detect invalid numbers and play a reorder tone without sending any signaling messages toCisco Unified Communications Manager.
C. If dialed digits match an entry of a SIP dial rule, the dialed string is sent in a single SIP 200 OK message toCisco Unified Communications Manager.
D. If Cisco Unified Communications Manager requires more digits, KPML can be used to send the remainingdigits from the SIP phone to Cisco Unified Communications Manager one-by-one.
E. If Cisco Unified Communications Manager requires more digits, another en bloc message is used to sendthe remaining digits from the SIP.

NEW Q2
Which three Cisco Unified CallManager configuration steps are required to support third party SIP phones? (Choose three.)

A. Configure the device in Cisco Unified CallManager.
B. Change the proxy address in the SIP phone to an IP address or the Fully Qualified Domain Name (FQDN)of Cisco Unified CallManager.
C. Associate the device with the end user.
D. Configure the phone with the TLS username and password.
E. Configure the end user in Cisco Unified CallManager.
F. Add the MAC address of the Cisco Unified CallManager server to the SIP phone configuration page.

NEW Q3
Which four software based media resources require that the Cisco IP voice media stream Application be activated?

A. MOH.
B. SIP.
C. H.323 Gateways.
D. Annunciator.
E. Gatekeeper.
F. MTP.
G. Audio conferencing.

NEW Q4
Which protocol is recommended to be used between Cisco Unified Communications Manager and the voice gateway to simplify the dial plan?

A. SIP.
B. SCCP.
C. H323.
D. RSVP.
E. MGCP.

NEW Q5
Which protocol can Cisco Unified Communications Manager not use to monitor the status of the gateway?

A. H.323
B. SIP
C. MGCP
D. SCCP

NEW Q6
In a centralized call-processing solution, there are five sites connected through an IP WAN. To optimize the utilization of the IP WAN, CAC needs to be implemented. How should CAC be implemented?

A. Use a gatekeeper to control allocated bandwidth properly.
B. Use locations CAC with a single location.
C. Use a gatekeeper and Cisco Unified Border Element to provide CAC to sites that use a combination of SIPand MGCP gateways.
D. Use a gatekeeper to only control those locations that use H.323 gateways and a Cisco Unified BorderElement to control those sites that use MGCP or SIP gateways.
E. Use locations CAC with five locations in addition to Hub none.

NEW Q7
Which two features are advantages of deploying a cluster over WAN? (Choose two.)

A. Shared line appearances
B. CentralizedDSP resources
C. Extension mobility within the cluster
D. Scalability up to 20 sites, if thereis sufficient IP WAN bandwidth
E. Failover to co-resident Cisco UnifiedCall Manager Express platforms

NEW Q8
The Ajax Corporation is designing an IP telephony network using Cisco MCS 7845 Series servers, each one capable of supporting 7500 devices. The design must meet these requirements:
– Be cost-effective
– Support up to 7500 phones
– Provide a minimal level of redundancy
Which configuration will meet Ajax Corporation needs?

A. Two Cisco Unified Communications Manager servers:
1 publisher and TFTP server combined.
1 primary subscriber.
B. Three Cisco Unified Communications Manager servers:
1 publisher and TFTP server combined.
1 primary subscriber.
1 backup subscriber.
C. Four Cisco Unified Communications Manager servers:
1 publisher.
1 TFTP server.
1 primary subscriber.
1 backup subscriber.
D. Five Cisco Unified Communications Manager servers:
1 publisher.
1 TFTP server.
1 primary subscriber.
2 backup subscribers.

NEW Q9
How are Cisco Unified CallManager location parameters used?

A. Assign directory numbers to devices as they connect to the IP telephony network.
B. Specify the bandwidth used for audio and video calls.
C. Implement call admission control in a centralized call processing deployment.
D. Provide alternate call routing when the primary call path is unavailable.

NEW Q10
Which statement regarding Cisco IP voice media streaming application is correct?

A. It should be activated on the gateway in cluster that supports the TFTP service.
B. It should be activated on the gatekeeper in cluster that supports the TFTP service.
C. It should be activated on the node in cluster that does not support the TFTP service.
D. It should be activated on the node in cluster that supports the TFTP service.

NEW Q11
Which option describes how you add software conference bridges to Cisco Unified Communications Manager?

A. By adding a Cisco Unified CM server to the cluster.
B. By adding a software conference bridge using Conference Bridge Configuration.
C. By installing DSP to a Cisco Unified CM server.
D. By reassigning other media resources to conference resources.

NEW Q12
Which of these media resources can be configured in Cisco Unified Communication manager? (Choose Three)

A. MOH Server
B. Voice Termination Point DSP
C. Transcoder
D. Auto Attendant
E. Conference Bridge

NEW Q13
What is the relationship between a Region and a Location?

A. The Region codec parameter is used between a Region and its configured Locations.
B. The Region setting for a Location sets the number of audio and video calls that Location can support.
C. The codec parameter configured in the Region is only used between Regions and Location bandwidth isonly used between Locations.
D. The Region codec parameter is combined with Location bandwidth when communicating with otherRegions.

……more, sorry for not remembering……

p.s. I used passleader premium 300-070 vce dumps for passing exam (Both VCE and PDF dumps are available here: https://tr.im/GinMC), all new questions can be found from it.

Good Luck!!!

Preemal Oza

Preemal Oza

New 300-075 Exam Questions and Answers Updated Recently (3/May/2016):

NEW QUESTION 309
A voice engineer is enabling video capabilities between H.323 and SIP endpoints. Which component allows for standardized caller addresses between the endpoints?

A. search rules
B. SIP route pattern
C. policy service
D. transform

Answer: B
Explanation:
“www.cisco.com/en/US/tech/tk652/tk701/technologies_configuration_guide_chapter09186a00800eadee.html”

NEW QUESTION 310
Which two statements about Cisco Unified Communications Manager Extension Mobility are true? (Choose two.)

A. After an autogenerated device profile is created, you can associate it with one or more users.
B. An autogenerated device profiles can be loaded on a device at the same time as a user profile.
C. A device can adopt a user profile even when no user is logged in.
D. A device profile has most of the same attributes as a physical device.
E. Devices can be configured to allow more than one user to be logged in at the same time.

Answer: BC
Explanation:
“www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a0080153e60.html#wp1092734”

NEW QUESTION 311
When you configure a globalized dial plan, in which three ways can you enable ingress gateways to process calls? (Choose three.)

A. Configure the called-party transformation settings for incoming calls on H.323 gateways.
B. Configure translation patterns in the partitions used by the gateway calling search space.
C. Configure SIP trunks between Cisco Unified Communications Manager clusters.
D. Configure a remote site device pool.
E. Configure a hunt group.
F. Configure the gateway with prefix digits to add necessary country and region codes.

Answer: ABF
Explanation:
“www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/8x/uc8x/dialplan.html#wp115316”

NEW QUESTION 312
How many nodes can a phone establish a connection to at the same time?

A. 4
B. 3
C. 1
D. 2

Answer: D

NEW QUESTION 313
Company X has a primary and a backup Cisco Unified Communications Manager instance. The administrator had to do maintenance on the primary node and did a shutdown, which resulted in a failover to the backup node. What happens when the primary node comes back online?

A. The primary node becomes the backup node.
B. Endpoints detect that the primary is back and reregisters automatically.
C. The backup node must be shut down first to allow the endpoints to realize that the primary node is online again.
D. Nothing, the endpoints only failover when the node they lose connection to their registered node.

Answer: B

NEW QUESTION 314
Company X has deployed a VCS Control with a local zone and a traversal client zone. To facilitate external calls, VCS Expressway is deployed and traversal server zone is set up there. Video endpoints inside Company X have registered, but are unable to receive calls from outside endpoints. Which option could be the cause of this issue?

A. The traversal zone on the VCS Control does not have a search rule configured.
B. The access control list on the VCS Control must be updated with the IP for the external users.
C. When a traversal zone is set up on VCS Control only outbound calls are possible.
D. The local zone on the VCS Control does not have a search rule configured.

Answer: B

NEW QUESTION 315
Which two options are requirements for hardware MTP on Cisco IOS routers? (Choose two.)

A. the same audio codec on both legs of the call
B. an FXO card
C. a binding IP address
D. a hardware transcoder
E. DSP resources
F. a T1 card

Answer: DE

NEW QUESTION 316
The Cisco Unified Communications system of a company has five types of devices:
•Cisco Jabber Desktop
•CP-7965
•DX-650
•EX-60
•MX-200
Which two types of devices are affected when an engineer changes the DSCP for Video Calls service parameter? (Choose two.)

A. DX-650
B. Cisco Jabber Desktop
C. CP-7965
D. EX-60
E. MX-200

Answer: AC

NEW QUESTION 317
Refer to the exhibit. An engineer receives a ticket to troubleshoot a one-way audio issue with these symptoms:
– User A can hear user and vice versa.
– User A can hear user C, however user cannot hear user A.
– User can heat user C, however user cannot hear user .
Which two properties are the most likely reasons for this issue? (Choose two.)
Image URL: examgod.com/plimages/1711f20d5ff5_FBCC/3171_thumb.jpg

A. The Cisco EX60 default gateway of user is missing from the network configuration.
B. The NAT device is allowing only RTP/RTCP ports from the internal network to the DMZ.
C. The Cisco EX60 of user is not responding to requests coming from the TMS server.
D. The Cisco VCS Expressway is not responding to the SIP INVITE coming from the Cisco VCS Control.
E. The router does not have a route back from the DMZ to the internal network.

Answer: CE

NEW QUESTION 318
Which three messages does a Cisco VCS use to monitor the Presence status of endpoints? (Choose three.)

A. start-call
B. in-all
C. end-call
D. call-ended
E. call-started
F. registration

Answer: BDF
Explanation:
“www.cisco.com/c/en/us/td/docs/telepresence/infrastructure/articles/vcs_monitors_presence_status_endpoints_kb_186.html”

NEW QUESTION 319
Which three steps configure Cisco Unified Survivable Remote Site Telephony for SIP phones? (Choose three.)

A. Configure voice register pool.
B. Configure voice register global dn.
C. Configure an SRST reference.
D. Configure a phone NTP reference.
E. Configure the SIP registrar.
F. Configure telephony service.

Answer: ABC

NEW QUESTION 320
……

P.S. These New 300-075 Exam Questions Were Just Updated From The Real 300-075 Exam, You Can Get The Newest 300-075 Dumps In PDF And VCE From — http://bitly.com/valid-300-075-dumps-vce-pdf (355q)

Good Luck !!!

Katy Mosiewicz

Katy Mosiewicz

New 300-070 Exam Questions and Answers Updated Recently (24/May/2016):

NEW QUESTION 146
Which codec provides native WebRTC-based video chat support in browsers such as Mozilla Firefox?

A. H.265
B. WMV
C. H.264
D. G.711
E. H.323

Answer: C

NEW QUESTION 147
An engineer is setting up a system with voice and video endpoints using auto-QoS policy on the switches. Which DSCP values are expected for interactive voice and video?

A. F and AF-41
B. EF and CS6
C. EF and CS3
D. EF and AF21

Answer: A
Explanation:
“www.cisco.com/c/en/us/td/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/QoS-SRND-Book/QoSIntro.html”

NEW QUESTION 148
Which statement about translation patterns and transformation patterns is true?

A. Both transformation patterns and translation patterns support only numeric values.
B. Translation patterns support numeric and alphanumeric values, whereas transformation patterns support only numeric values.
C. Transformation patterns support numeric and alphanumeric values, whereas translation patterns support only numeric values.
D. Both transformation patterns and translation patterns support numeric and alphanumeric values.

Answer: D

NEW QUESTION 149
Which two are enterprise parameters? (Choose two.)

A. User search limit
B. T302 parameter
C. Enable Call Detail Records
D. Enable Dependency Records
E. codecs parameters for voice media-streaming applications

Answer: AD

NEW QUESTION 150
An organization has built their video infrastructure to perform ad hoc video calls, but they also need to conduct managed video conference calls. Which hardware component is needed to conduct these calls?

A. VCS-E
B. IOS gateway
C. MCU
D. TelePresence server

Answer: A

NEW QUESTION 151
……

NEW QUESTION 152
To verify that proper digit manipulation is being applied when using called party transformation patterns, which Cisco IOS command do you use from the router or voice gateway?

A. show voice ccapi inout
B. debug voice ccapi in
C. show voice ccapi
D. show voice ccapi in
E. debug voice ccapi inout
F. debug voice ccapi out
G. show voice ccapi out

Answer: E
Explanation:
“www.netcraftsmen.com/called-party-transformation-patterns-example-and-validation/”

NEW QUESTION 153
Which two components must an engineer configure before configuring SIP route pattern? (Choose two.)

A. route filter
B. SIP trunk
C. route partition
D. calling search space
E. SIP profile

Answer: BE
Explanation:
“www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/bccm-861-cm/b03siprp.html”

NEW QUESTION 154
Employees at a company must dial 9 first to reach an external number. Which route pattern is used to route the call if a user dials the toll-free number 1-866-555-1212?

A. 9.18XX[2-9]XXXXXX
B. 9.18[0,5-8][0,5-8]XXXXXXX
C. 9.1XXXXXXXXXX
D. 9.1866XXXXXXX
E. 9.1866[2-9]XXXXXX
F. 9.1[2-9]XX[2-9]XXXXXX

Answer: E

NEW QUESTION 155
Which three options can be used to configure digit manipulation for dial peers? (Choose three.)

A. digit translation rules
B. called party transformations
C. route partitions
D. forward digits
E. route patterns
F. digit stripping and prefixes
G. calling party transformations

Answer: ADF
Explanation:
“www.cisco.com/c/en/us/td/docs/ios/12_2/voice/configuration/guide/fvvfax_c/vvfpeers.html#wp1244453”

NEW QUESTION 156
What are the characteristics of a Cisco Unified Communications Manager group?

A. Each call-processing server can be assigned to a single Cisco Unified Communications Manager group.
B. A Cisco Unified Communications Manager group is a prioritized list of (one or more) call- processing and application servers.
C. Each device has to have a Cisco Unified Communications Manager group assigned, which will determine the primary and backup servers to which it can register.
D. A single Cisco Unified Communications Manager group can exist in a single cluster.

Answer: B

NEW QUESTION 157
A customer recently installed a Cisco TelePresence MCU 5320. The customer wants a virtual meeting room that restricts participants from communicating before the customer joins the call. Which feature in the MCU enables this functionality?

A. numeric ID
B. floor and chair control
C. owner
D. PIN codes

Answer: D

NEW QUESTION 158
……

P.S. These New 300-070 Exam Questions Were Just Updated From The Real 300-070 Exam, You Can Get The Newest 300-070 Dumps In PDF And VCE From — http://bitly.com/300-070-dumps-vce-pdf (203q)

Good Luck !!!