Which of the following statements is correct regarding EIGRP manual summarization?
(Select the best answer.)
A.
Manual summarization is configured in interface configuration mode.
B.
Manual summarization must occur on classful bit boundaries.
C.
Manual summarization is enabled by issuing the no ip summary-address eigrp command.
D.
Manual summarization is configured in global configuration mode.
E.
Manual summarization is enabled by issuing the no auto-summary command.
Examples
The following example configures an administrative distance of 95 on interface Ethernet 0/0 for the 192.168.0.0/16 summary address:
Router(config)# router eigrp 1
Router(config-router)# no auto-summary
Router(config-router)# exit
Router(config)# interface Ethernet 0/0
Router(config-if)# ip summary-address eigrp 1 192.168.0.0 255.255.0.0 95
The following example configures the 10.1.1.0/24 subnet to be leaked through the 10.0.0.0 summary address:
Router(config)# router eigrp 1
Router(config-router)# exit
Router(config)# access-list 1 permit 10.1.1.0 0.0.0.255
Router(config)# route-map LEAK-10-1-1 permit 10
Router(config-route-map)# match ip address 1
Router(config-route-map)# exit
Router(config)# interface Serial 0/0
Router(config-if)# ip summary-address eigrp 1 10.0.0.0 255.0.0.0 leak-map LEAK-10-1-1
Router(config-if)# end