You want to configure switch R1 to propagate VLAN information across the Company
network using VTP. What must be configured on a Cisco switch in order to advertise VLAN
information?
A.
VTP mode
B.
VTP password
C.
VTP revision number
D.
VTP pruning
E.
VTP domain name
F.
None of the other alternatives apply
Explanation:
If the switch being installed is the first switch in the network, the management domain will
need to be created. However, if the network has other switches running VTP, then the new
switch will join an existing management domain. Verify the name of the management
domain. If the management domain has been secured, verify and configure the password for
the domain.
To create a management domain or to add a switch to a management domain, use the vtp
domain command in the global configuration mode or VLAN configuration mode.
Switch(config)#vtp domain name
Switch(vlan)#vtp domain
E.
Since VTP Server mode is active by default on Cisco switches, only a VTP domain has to be configured. From there, all other information is built from the highest revision.
Per Cisco.com (https://www.cisco.com/c/en/us/support/docs/lan-switching/vtp/10558-21.html): “If a switch is configured as a VTP server without a VTP domain name, you cannot configure a VLAN on the switch.”