Ferris Plastics, Inc. is a medium sized company, with an enterprise network (access, distribution and core switches) that provides LAN connectivity from user PCs
to corporate servers. The distribution switches are configured to use HSRP to provide a high availability solution.
· DSW1 primary device for VLAN 101 VLAN 102 and VLAN 105
· DSW2 primary device for VLAN 103 and VLAN 104
· A failure of GigabitEthemet1/0/1 on primary device should cause the primary device to release its status as the primary device, unless GigabitEthernet1/0/1 on
backup device has also failed.
Troubleshooting has identified several issues. Currently all interfaces are up. Using the running configurations and show commands, you have been asked to
investigate and respond to the following question.
During routine maintenance, it became necessary to shut down the GigabitEthernet1/0/1 interface on DSW1. All other interfaces were up. During this time, DSW1
remained the active device for the VLAN 102 HSRP group. You have determined that there is an issue with the decrement value in the track command for the
VLAN 102 HSRP group. What needs to be done to make the group function properly?
A.
The decrement value on DSW1 should be greaterthan 5 and less than 15. 0
B.
The decrement value on DSW1 should be greaterthan 9 and less than 15.
C.
The decrement value on DSW1 should be greaterthan 11 and less than 19.
D.
The decrement value on DSWTs should be greaterthan 190 and less than 200.
E.
The decrement value on DSWTs should be greaterthan 195 and less than 205.
Explanation:
Use “show run” command to show. The left Vlan102 is console1 of DS1. Priority value is 200, we should decrement value in the track command from 11 to 18.
Because 200 11 = 189 < 190(priority of Vlan102 on DS2).
