A new Aironet 1200 series AP has been installed in the Company WLAN. What happens
when this device is connected to the LAN, with a default configuration?
A.
The access point will attempt to download an encryption key from the nearest
wireless server.
B.
The access point makes several attempts to get an IP address from the DHCP
server. If the access point does not receive an address, it assigns itself the IP address
10.0.0.1 for 5 minutes.
C.
The access point will attempt to connect to the nearest wireless server using LEAP
authentication.
D.
The access point requests an IP address from the DHCP server. If the access point
does not receive an address, it continues to send requests indefinitely.
None of the other alternatives apply
Explanation:
When you connect a 350, 1130AG, 1200, or 1240AG series access point with a default
configuration to your LAN, the access point requests an IP address from your DHCP server
and, if it does not receive an address, continues to send requests indefinitely.
When you connect an 1100 series access point with a default configuration to your LAN, the
1100 series access point makes several attempts to get an IP address from the DHCP
server. If it does not receive an address, it assigns itself the IP address 10.0.0.1 for five
minutes. During this five-minute window, you can browse to the default IP address and
configure a static address. If after five minutes the access point is not reconfigured, it
discards the 10.0.0.1 address and reverts to requesting an address from the DHCP server. If
it does not receive an address, it sends requests indefinitely. If you miss the five-minute
window for browsing to the access point at 10.0.0.1, you can power-cycle the access point to
repeat the process.
Reference:
http://www.cisco.com/en/US/docs/wireless/access_point/12.3_7_JA/configuration/guide/s37frst.html