Which command will prevent access to the startup-config in NVRAM?

An attacker has gained physical access to a password protected router. Which command will
prevent access to the startup-config in NVRAM?

An attacker has gained physical access to a password protected router. Which command will
prevent access to the startup-config in NVRAM?

A.
no service password-recovery

B.
no service startup-config

C.
service password-encryption

D.
no confreg 0x2142



Leave a Reply 9

Your email address will not be published. Required fields are marked *


Tripi

Tripi

Correct !

IOS release 12.3T (and 12.4) introduced a great security feature:
the ability to disable password recovery (using the well-known break key sequence)
with the no service password-recovery global configuration command.
However, once you configure this feature on some routers,
you might have no means whatsoever to get it under control if you forget the password.

Tripi

Tripi

Correct !

IOS release 12.3T (and 12.4) introduced a great security feature:
the ability to disable password recovery (using the well-known break key sequence)
with the no service password-recovery global configuration command.

Hidy

Hidy

Hi!

PassLeader has updated the new 300-206 exam dumps!!

Here are some new questions and answers from PassLeader 300-206 exam dumps:

NEW QUESTION 133
You have installed a web server on a private network. Which type of NAT must you implement to enable access to the web server for public Internet users?

A. static NAT
B. dynamic NAT
C. network object NAT
D. twice NAT

Answer: A

NEW QUESTION 134
Refer to the exhibit. Which two statements about the SNMP configuration are true? (Choose two.)
Image URL
h t t p://examgod.com/plimages/dffc84b98391_E4D7/1341_thumb.png

A. The router’s IP address is 192.168.1.1.
B. The SNMP server’s IP address is 192.168.1.1.
C. Only the local SNMP engine is configured.
D. Both the local and remote SNMP engines are configured.
E. The router is connected to the SNMP server via port 162.

Answer: BD

NEW QUESTION 135
When you configure a Botnet Traffic Filter on a Cisco firewall, what are two optional tasks? (Choose two.)

A. Enable the use of dynamic databases.
B. Add static entries to the database.
C. Enable DNS snooping.
D. Enable traffic classification and actions.
E. Block traffic manually based on its syslog information.

Answer: BE

NEW QUESTION 136
Refer to the exhibit. What is the effect of this configuration?
Image URL:
h t t p://examgod.com/plimages/dffc84b98391_E4D7/1361_thumb.png

A. The firewall will inspect IP traffic only between networks 192.168.1.0 and 192.168.2.0.
B. The firewall will inspect all IP traffic except traffic to 192.168.1.0 and 192.168.2.0.
C. The firewall will inspect traffic only if it is defined within a standard ACL.
D. The firewall will inspect all IP traffic.

Answer: A

NEW QUESTION 137
When you configure a Cisco firewall in multiple context mode, where do you allocate interfaces?

A. in the system execution space
B. in the admin context
C. in a user-defined context
D. in the global configuration

Answer: A

NEW QUESTION 138
At which layer does Dynamic ARP Inspection validate packets?

A. Layer 2
B. Layer 3
C. Layer 4
D. Layer 7

Answer: A

NEW QUESTION 139
Which feature can suppress packet flooding in a network?

A. PortFast
B. BPDU guard
C. Dynamic ARP Inspection
D. storm control

Answer: D

NEW QUESTION 140
What is the default violation mode that is applied by port security?

A. restrict
B. protect
C. shutdown
D. shutdown VLAN

Answer: C

NEW QUESTION 141
What are two security features at the access port level that can help mitigate Layer 2 attacks? (Choose two.)

A. DHCP snooping
B. IP Source Guard
C. Telnet
D. Secure Shell
E. SNMP

Answer: AB

NEW QUESTION 142
At which layer does MACsec provide encryption?

A. Layer 1
B. Layer 2
C. Layer 3
D. Layer 4

Answer: B

NEW QUESTION 143
What are two enhancements of SSHv2 over SSHv1? (Choose two.)

A. VRF-aware SSH support
B. DH group exchange support
C. RSA support
D. keyboard-interactive authentication
E. SHA support

Answer: AB

And, now the valid full version PassLeader 300-206 exam dumps are available here:
http://www.passleader.com/300-206.html

André De

André De

New 300-206 Exam Questions and Answers Updated Recently (6/Feb/2016):

NEW QUESTION 197
How much storage is allotted to maintain system,configuration , and image files on the Cisco ASA 1000V during OVF template file deployment?

A. 1GB
B. 5GB
C. 2GB
D. 10GB

Answer: C

NEW QUESTION 198
Which feature is a limitation of a Cisco ASA 5555-X running 8.4.5 version with multiple contexts?

A. Deep packet inspection
B. Packet tracer
C. IPsec
D. Manual/auto NAT
E. Multipolicy packet capture

Answer: C

NEW QUESTION 199
When access rule properties are configured within ASDM, which traffic direction type is required by global and management access rule?

A. Any
B. Both in and out
C. In
D. Out

Answer: C

NEW QUESTION 200
Which option is a different type of secondary VLAN?

A. Transparent
B. Promiscuous
C. Virtual
D. Community

Answer: B

NEW QUESTION 201
Refer to the exhibit. Which statement about this access list is true?

access-list test: extended premit ip 2001:DB5:7::/64
192.168.1.0 255.255.255.0

A. This access list does not work without 6to4 NAT
B. IPv6 to IPv4 traffic permitted on the Cisco ASA by default
C. This access list is valid and works without additional configuration
D. This access list is not valid and does not work at all
E. We can pass only IPv6 to IPv6 and IPv4 to IPv4 traffic

Answer: D

NEW QUESTION 202
Which option must be configured on a transparent Cisco ASA adaptive security appliance for it to be managed over Layer 3 networks?

A. Static routes
B. Routed interface
C. Security context
D. BVI

Answer: D

NEW QUESTION 203
Which statement about Dynamic ARP Inspection is true ?

A. In a typical network, you make all ports as trusted expect for the ports connection to switches , which are untrusted
B. DAI associates a trust state with each switch
C. DAI determines the validity of an ARP packet based on valid IP to MAC address binding from the DHCP snooping database
D. DAI intercepts all ARP requests and responses on trusted ports only
E. DAI cannot drop invalid ARP packets

Answer: C

NEW QUESTION 204
Which command is the first that you enter to check whether or not ASDM is installed on the ASA?

A. Show ip
B. Show running-config asdm
C. Show running-config boot
D. Show version
E. Show route

Answer: B

NEW QUESTION 205
Which option is the Cisco ASA on-box graphical management solution?

A. SSH
B. ASDM
C. Console
D. CSM

Answer: B

NEW QUESTION 206
……

P.S. These New 300-206 Exam Questions Were Just Updated From The Real 300-206 Exam, You Can Get The Newest 300-206 Dumps In PDF And VCE From — http://bitly.com/1Pg5mjR (222q)

Good Luck !!!

Michael

Michael

Hi Andre

Are the answers on this new questions correct?, I wrote the exam yesterday and failed, this questions were there.

zainab

zainab

NEW QUESTION 201
Refer to the exhibit. Which statement about this access list is true?

access-list test: extended premit ip 2001:DB5:7::/64
192.168.1.0 255.255.255.0

A. This access list does not work without 6to4 NAT
B. IPv6 to IPv4 traffic permitted on the Cisco ASA by default
C. This access list is valid and works without additional configuration
D. This access list is not valid and does not work at all
E. We can pass only IPv6 to IPv6 and IPv4 to IPv4 traffic

Answer: D

the correct is A. This access list does not work without 6to4 NAT

zainab

zainab

Question 105 – Prior to a software upgrade which Cisco Prime Infrastructure feature determines if the devices being upgraded have sufficient RAM to support the new software

Answer on dump is incorrect, should be Upgrade Analysis Report not Software upgrade report

Question 110 – Which statement about Cisco ASA Netflow v9 (NSEL) is true?

Answer on dump is incorrect, should be NSEL track’s flow-create, flow-teardown, and flow-denied events, and generates appropriate NSEL data records

Question 203 – What is a different type of secondary VLAN?

Answer on dump is incorrect, promiscuous port belongs to the primary VLAN not the secondary VLAN – Answer should be “Community”

Question 13 – What Cisco Prime infrastructure feature allows you to assign templates to a group of wireless LAN controllers with similar configuration requirements?

Answer on dump appears to be incorrect, as per cisco documentation the answer should be “Controller configuration group” yes you can use a composite template to apply similar changes to devices but doesnt automatically group them, i leant towards controller configuration group which is a valid feature.

Question 87 – This command is used to configure the SNMP server on a Cisco router. Which option is the encryption password for the SNMP server?

Agree with the TheDarkKnight – SNMPv2 looks to be the encryption password.

Example: snmp-server user admin vpn group v3 auth sha letmein priv 3des cisco123

Question 61 – Which statement about this access-list is true?
access-list test extended permit ip 2001:DB5:7::/64 192.168.2.0 255.255.255.0

Again agree with the TheDarkKnight, this is valid with a 6to4 translation but the question doesnt specify what version of code is being run on the ASA