SSL VPN client software was loaded to the AS

The following configuration steps have been completeD.
WebVPN was enabled on the ASA outside interface.
SSL VPN client software was loaded to the ASA.
A DHCP scope was configured and applied to a WebVPN Tunnel Group.
What additional step is required if the client software fails to load when connecting to the ASA SSL page?

The following configuration steps have been completeD.
WebVPN was enabled on the ASA outside interface.
SSL VPN client software was loaded to the ASA.
A DHCP scope was configured and applied to a WebVPN Tunnel Group.
What additional step is required if the client software fails to load when connecting to the ASA SSL page?

A.
The SSL client must be loaded to the client by an ASA administrator

B.
The SSL client must be downloaded to the client via FTP

C.
The SSL VPN client must be enabled on the ASA after loading

D.
The SSL client must be enabled on the client machine before loading



Leave a Reply 7

Your email address will not be published. Required fields are marked *


mage

mage

Answer is A…

dieselsilvester

dieselsilvester

Correct Answers: C

We are providing Free 300-209 real exam questions with 100% passing and money back assurance. You can easily pass your exam with our study material. So don’t be afraid get your exam dumps from Dumps4download.co.in and prepare your exam now.
For More Detail: https://www.dumps4download.co.in/free-300-209-practice-questions.html

Ronald Ammons

Ronald Ammons

New 300-209 Exam Questions and Answers Updated Recently (4/July/2017):

NEW QUESTION 294
Refer to the exhibit, which result of this command is true?

A. Makes the router generate a certificate signing request
B. Generates an RSA key called TRIALFOUR
C. It displays the RSA public keys of the router
D. It specifies self- signed enrollment for a trust point

Answer: A

NEW QUESTION 295
An engineer is attempting to establish a new site-to-site VPN connection. The tunnel terminates on an ASA 5506-X which is behind an ASA 5515-X. The engineer notices that the tunnel is not establishing. Which option is a potential cause?

A. Certificates were not configured
B. Diffie – Helman Group is not set
C. Access lists were not applied
D. NAT – traversal is not configured

Answer: D

NEW QUESTION 296
Which algorithm does ISAKMP use to securely derive encryption and integrity keys?

A. Diffie – Hellman
B. AES
C. ECDSA
D. RSA
E. 3DES

Answer: D

NEW QUESTION 297
Which purpose of configuring perfect Forward secret is true?

A. For every negotiation of a new phase 1 SA, the two gateways generate a new set of phase 2 keys.
B. For every negotiation of a new phase 2 SA, the two gateways generate a new set of phase 1 keys.
C. For every negotiation of a new phase 1 SA, the two gateways generate a new set of phase 1 keys.
D. For every negotiation of a new phase 2 SA, the two gateways generate a new set of phase 2 keys.

Answer: A

NEW QUESTION 298
An engineer has successfully established a phase 1 tunnel, but notices that no packets are decrypted on the head end side of the tunnel. What is a potential cause for this issue?

A. different phase 2 encryption
B. misconfigured DH group
C. disabled PFS
D. firewall blocking Phase 2 ESP or AH

Answer: A

NEW QUESTION 299
Which option describes traffic that will initiate a VPN connection?

A. trusted
B. external
C. internal
D. interesting

Answer: D

NEW QUESTION 300
……

P.S. These New 300-209 Exam Questions Were Just Updated From The Real 300-209 Exam, You Can Get The Newest 300-209 Dumps In PDF And VCE From — http://www.passleader.com/300-209.html (307q VCE and PDF)

Good Luck!

rafilsk

rafilsk

I failed the 300-209 exam today
All exam questions are in the material passleader, so I believe the answers are incorrect!

myk

myk

webvpn
enable outside <<< enable ssl vpn
anyconnect enable <<< enable anyconnect client

Hobo

Hobo

This is the 7th iteration of these exam questions on this site…. why are so many of them still wrong?

With how many are wrong, we’ll have to verify literally every question to be safe…..