Refer to the exhibit.
R4 is configured as a receive-only EIGRP stub, and is adjacent with 209.165.202.139 (R3).
However, R4 is not learning about network 209.165.201.0/27 from R3. What could be the cause of
this issue?
A.
R4 should learn this route from 209.165.200.242, and not from R3.
B.
R3 is configured as a receive-only EIGRP stub.
C.
R3 and R4 may be using different EIGRP process numbers.
D.
R3 and R4 are asymmetrically adjacent neighbors.
Explanation:
Configuring EIGRP Stub Routing
To configure a remote or spoke router for EIGRP stub routing, use the following commands
beginning in router configuration mode:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/eigrpstb.html
