Refer to the exhibit.
Client1 has an IPsec VPN tunnel established to a Cisco ASA adaptive security appliance in
Chicago. The remote access VPN client wants to access www.cisco.com, but split
tunneling is disabled. Which of these is the appropriate configuration on the Cisco ASA
adaptive security appliance if the VPN client’s public IP address is 209.165.201.10 and it
is assigned a private address from 192.168.1.0/24?
A.
same-security-traffic permit intra-interface
ip local pool ippool 192.168.1.1-192.168.1.254
global (outside) 1 209.165.200.230
nat (inside) 1 192.168.1.0 255.255.255.0
B.
same-security-traffic permit intra-interface
ip local pool ippool 192.168.1.1-192.168.1.254
global (outside) 1 209.165.200.230
nat (outside) 1 192.168.1.0 255.255.255.0
C.
same-security-traffic permit intra-interface
ip local pool ippool 192.168.1.1-192.168.1.254
global (inside) 1 209.165.200.230
nat (inside) 1 192.168.1.0 255.255.255.0
D.
same-security-traffic permit intra-interface
ip local pool ippool 192.168.1.1-192.168.1.254
global (outside) 1 209.165.200.230nat (outside) 1 209.165.201.10 255.255.255.255
E.
same-security-traffic permit intra-interface
ip local pool ippool 192.168.1.1-192.168.1.254
global (outside) 1 209.165.200.230
nat (inside) 1 209.165.201.10 255.255.255.255
F.
same-security-traffic permit intra-interface
ip local pool ippool 192.168.1.1-192.168.1.254
global (inside) 1 209.165.200.230
nat (inside) 1 209.165.201.10 255.255.255.255