Which of these is the appropriate configuration on the Cisco ASA

Refer to the Exhibit.

Refer to the exhibit. Client1 has an IPsec VPN tunnel established to a Cisco ASA adaptive security appliance in Chicago. The remote access VPN client wants to access www.cisco.com, but split tunneling is disabled. Which of these is the appropriate configuration on the Cisco ASA adaptive security appliance if the VPN client’s public IP address is 209.165.201.10 and it is assigned a private address from 192.168.1.0/24?

Refer to the Exhibit.

Refer to the exhibit. Client1 has an IPsec VPN tunnel established to a Cisco ASA adaptive security appliance in Chicago. The remote access VPN client wants to access www.cisco.com, but split tunneling is disabled. Which of these is the appropriate configuration on the Cisco ASA adaptive security appliance if the VPN client’s public IP address is 209.165.201.10 and it is assigned a private address from 192.168.1.0/24?

A.
same-security-traffic permit intra-interface
Ip local pool ippool 192.168.1.1-192.168.1.254
Global (outside) 1 209.165.200.230
Nat (inside) 1 192.168.1.0 255.255.255.0

B.
same-security-traffic permit intra-interface
Ip local pool ippool 192.168.1.1-192.168.1.254
Global (outside) 1 209.165.200.230
Nat (outside) 1 192.168.1.0 255.255.255.0

C.
same-security-traffic permit intra-interface
Ip local pool ippool 192.168.1.1-192.168.1.254
Global (inside) 1 209.165.200.230
Nat (inside) 1 192.168.1.0 255.255.255.0

D.
same-security-traffic permit intra-interface
Ip local pool ippool 192.168.1.1-192.168.1.254
Global (outside) 1 209.165.200.230
Nat (outside) 1 209.165.201.10 255.255.255.255

E.
same-security-traffic permit intra-interface
Ip local pool ippool 192.168.1.1-192.168.1.254
Global (outside) 1 209.165.200.230
Nat (inside) 1 209.165.201.10 255.255.255.255

F.
same-security-traffic permit intra-interface
Ip local pool ippool 192.168.1.1-192.168.1.254
Global (inside) 1 209.165.200.230
Nat (inside) 1 209.165.201.10 255.255.255.255



Leave a Reply 4

Your email address will not be published. Required fields are marked *


KP

KP

The Q&A for 350-018 on aiotestking is not up to date and you are wasting your time. Testking, not aiotestking, and affiliates are under court order to remove all Cisco test content and Cisco has been updating their tests, not to *test* your knowledge of a track, but rather to protect the test. What I am saying is that the updated 350-018 has about 25% of the questions coming from random sources that really don’t have much to do with testing one’s security knowledge.

Can't pass

Can't pass

ell I have just taken the exam for the 2nd time and failed again.

Having failed the first time in Jan 2016, I thought I’d try some of these dump questions, however there are only approx 40% in the real exam.

You will know if you have a valid dump if it contains the following question which was in the recent exam (v4) June 2016:

Drag and Drop the correct packet format for IPv6 Teredo Protocol (or similar wording).
It then gave boxes with:
IPv4
IPv6 Packet
UDP
Flags

Another question had a Drag & Drop for Change Management process

Also a question on what would be the best solution for IPS between two high load VM’s. It gave answers with SourceFire Appliance, SoureFire NGFWv, ASA

Which one of the following Cisco ASA adaptive security appliance rule samples will send HTTP data to the AIP-SSM module to evaluate and stop HTTP attacks? (Select TWO)

The above in the dumps asks for 1 answer, but the exam asks for 2!!

Another question asked about OID SNMPv3 queries causing high CPU load. Which filter config would best address this.

Let me know if you find a dump which contains this. Good luck.

Ibrahim

Ibrahim

Hi guys, I passed 350-018 several hours ago.. i got score 9xx/1000/ I am using dump 892q pdf file and around 98% questions are from this pdf, some recently new questions be added as well:

QUESTION 859
Which two statements about DTLS are true?(Choose two.)

A. If DPD is enabled.DTLS can fall back to a TLS connection.
B. It is disabled by default if you enable SSL VPN on the interface.
C. It uses two simultaneous IPSec tunnels to carry traffic.
D. If DTLS is disabled on an interface, then SSL VPN connections must use SSL/TLS tunnels.
E. Because if requires two tunnels, it may experience more latency issues than SSL connections.

Answer: AC

QUESTION 860
What protocol does SMTPS use to secure SMTP connections?

A. TLS
B. AES
C. Telnet
D. SSH

Answer: A

QUESTION 861
What security element must an organization have in place befor it can implement a security audit and validate the audit results?

A. a security policy
B. an Incident Response Team
C. Network access control
D. Firewalls
E. a Security Operations Center

Answer: A

QUESTION 862
Which two router configurations block packets with the type 0 routing header on the interface?(Choose two)
8621
8622

A. A
B. B
C. C
D. D
E. E

Answer: BC

QUESTION 863
What are three ways you can enforce a BCP38 policy on an Internet edge device? (Choose three.)

A. Avoid RFC 1918 internal addressing.
B. Apply ingress filters for RFC 1918 addresses
C. Apply ingress ACL. Filters for BOGON routes
D. Implement source NAT
E. Implement Unicast RPF.
F. Implement Cisco Express Forwarding.

Answer: BCE

QUESTION 864
Refer to the exhibit. What feature must be implemented on the network to produce the given output?
8641

A. CAR
B. NBAR
C. WFQ
D. PQ
E. CQ

Answer: B

QUESTION 865
What is an example of a WEP cracking attack?

A. Cafe Latte attack
B. Reflected XSS attack
C. Directory traversal attack
D. SQL injection attack

Answer: A

QUESTION 866
Which statement about remote procedure calls is true?

A. They can be invoked by the client and the server
B. They can emulate different hardware specifications on a single platform
C. They support synchronous and asynchronous requests
D. They use a special assembly instruction set to process remote code without conflicting with other remote processes
E. They support optimized data replication among multiple machines

Answer: D

QUESTION 867
Refer to the exhibit. Routers R1,R2, and R3 have IPv6 reachability, and R1 and R3 are able to ping each other with IPv6 global unicast address. However, R1 and R3 are unable to ping eachother with their link-local address.
What is a possible reason for the problem?
8671

A. Multicast must be enabled to allow link-local address to traverse multiple hops.
B. Link-local addresses can be used only with a physical interface’s local network
C. ICMPv6 packets are dropped when the destination uses a link-local address
D. Link-local addresses are forwarded by IPv6 routers using loopback interfaces
E. Link-local address can communicate with neighboring nodes only if routing is enabled between them

Answer: B

QUESTION 868
……

I have uploaded all the real questions of 350-018 exam to my Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDNW5LVThzRi1jSGc
Welcome to download them freely!