A customer would like to monitor traffic that is being sent to a specific virtual machine named
VM001 using SPAN. The customer has another virtual machine configured as a sniffer host called
VM002. What configuration is required, and what other changes will need to be made? (Choose
two.)
VSM-PRI-188# sh int vethernet 5
Vethernet5 is up
Port description is VM001, Network Adapter 2
HardwarE. Virtual, address: 0050.56b0.001e (bia 0050.56b0.001e)
Owner is VM “VM001”, adapter is Network Adapter 2
Active on module 5
VMware DVS port 484
Port-Profile is VM-vlan-10
Port mode is access
VSM-PRI-188# sh int vethernet 6
Vethernet6 is up
Port description is VM002, Network Adapter 1
HardwarE. Virtual, address: 0050.56b0.0020 (bia 0050.56b0.0020)
Owner is VM “VM002”, adapter is Network Adapter 1
Active on module 5
VMware DVS port 485
Port-Profile is VM-vlan-10
Port mode is access
A.
Monitor session 1 type span
Source interface veth5 both
Destination interface veth6
No shut
B.
monitor session 1
source vlan 10
destination interface veth6
no shut
C.
monitor session 1 type er-span
source interface vlan 10
destination ip 10.1.1.10
no shut
D.
VM002 must be removed from the Nk1V
E.
Move VM002 to Module 5
F.
Restart the VEM on module 5