What is a reason to use DHCPv6 on a network that uses SLAAC?
A.
To get a record of the IPs that are used by the clients
B.
To push DNS and other information to the clients
C.
No reason, because there is no need for DHCPv6 when using SLAAC
D.
Because DHCPv6 can be used only in stateful mode with SLAAC to record the IPs of the clients
E.
Because DHCPv6 can be used only in stateless mode with SLAAC to record the IPs of the clients
F.
Because DHCPv6 is required to use first-hop security features on the switches
IPv6 hosts can configure themselves automatically when connected to an IPv6 network using the Neighbor Discovery Protocol via Internet Control Message Protocol version 6 (ICMPv6) router discovery messages. When first connected to a network, a host sends a link-local router solicitation multicast request for its configuration parameters; routers respond to such a request with a router advertisement packet that contains Internet Layer configuration parameters.[15]
If IPv6 stateless address auto-configuration is unsuitable for an application, a network may use stateful configuration with the Dynamic Host Configuration Protocol version 6 (DHCPv6) or hosts may be configured manually using static methods.