3.130.254. IP addresses in the range 10.3.130.1 to 10.3.130.9 should be excluded. The IP phones are connected to an EtherSwitch module, interface GigabitEthernet1/0 on a Cisco 2811 router as per the topology diagram. The voice VLAN ID is 130 and default router for the IP phones is 10.3.130.1.
The EtherSwitch module has been preconfigured and is not configurable. You are also required to configure a second directory number 5010 as a shared directory number on line 2 of each IP phone.
Topology:
exhibit
3.130.254. IP addresses in the range 10.3.130.1 to 10.3.130.9 should be excluded. The IP phones are connected to an EtherSwitch module, interface GigabitEthernet1/0 on a Cisco 2811 router as per the topology diagram. The voice VLAN ID is 130 and default router for the IP phones is 10.3.130.1.
The EtherSwitch module has been preconfigured and is not configurable. You are also required to configure a second directory number 5010 as a shared directory number on line 2 of each IP phone.
Answer:
I agree with the answer.