You just entered the following command_Router(config#) lineconsole 0 Which operation is most
likely to follow?
A.
Configure the terminal type.
B.
Enter protocol parameters for a serial line.
C.
Create a password on the console terminal line.
D.
Establish a terminal type 4 connection to a remote host.
Explanation:
A console password is configured from global configuration mode, at the console line level. The
output below outlines each step from privileged EXEC mode forward.
Company-1#config tEnter configuration commands, one per line. End with CNTL/Z.Company –
1(config)#line console 0Company -1(config-line)#loginCompany -1(config-line)#password cisco1