What are two basic parameters needed to setup a dial peer connected to the PSTN? (Choose two)
A.
voice port
B.
signaling type
C.
interface bandwidth
D.
destination pattern
Explanation:
Depending on the call leg, a call is routed using one of the two types of dial peers:
POTS-Dial peer that defines the characteristics of a traditional telephony network connection.POTS dial peers map a dialed string to a specific voice port on the local router, normally the voice port connecting the router to the local PSTN, PBX, or telephone.
Voice-network-Dial peer that defines the characteristics of a packet network connection. Voice-network dial peers map a dialed string to a remote network device, such as the destination router that is connected to the remote telephony device.
The following examples show basic configurations for POTS andVoIPdial peers:
dial-peer voice 1 potsdestination-pattern 555….port 1/0:1dial-peer voice 2 voipdestination-pattern 555….
session target ipv4:192.168.1.1