When configuring a Cisco Catalyst switch to accommodate an IP phone with an attached PC, it is desired that the trust boundary be set between the IP phone and the switch. Which two commands on the switch are recommended to set the trust boundary as described? (Choose two.)
A.
mls qos trust extend [cos value]
B.
no mls qos trust dscp
C.
mls qos trust cos
D.
mls qos trust device cisco-phone
E.
switchport priority extend trust
F.
mls qos cos 5
Explanation:
mls qos trust [ cos ] :
By default, the port is not trusted. All traffic is sent through one egress queue. Use the cos keyword to classify ingress packets with the packet CoS values. The egress queue assigned to the packet is based on the packet CoS value. When this keyword is entered, the traffic is sent through the four QoS queues. Normally, the QoS information from a PC connected to an IP Phone should not be trusted. This is because the PC’s applications might try to spoof CoS or Differentiated Services Code Point (DSCP) settings to gain premium network service. In this case, use the cos keyword so that the CoS bits are overwritten to value by the IP Phone as packets are forwarded to the switch. If CoS values from the PC cannot be trusted, they should be overwritten to a value of 0.