You placed a newly purchased Cisco WiSM in slot 2 of a Catalyst 6504, assigned 172.20.229.61 and 172.20.229.62 to the service ports, but are not able to execute the session slot 2 proc 1 command. After looking at the relevant configuration snippet shown here, what should you do to correct the problem?
C6504#wism service-vlan 123
C6504#show run int vlan 123
!
interface Vlan123
description WiSM Service VLAN
ip address 172.20.229.66 255.255.255.192
end
Select the best response.
A.
Place the CiscoWiSM in slot 5, because no other slots are valid slots for the Cisco WiSM.
B.
Enable the DHCP scope for VLAN 123 with option 150 set to 1.1.1.1.
C.
Disable the DHCP scope for VLAN 123.
D.
Change VLAN 123’s IP address to 1.1.1.1 and mask 255.255.255.255.
E.
Change service port IP address assignments to be in the correct network.