The following commands are issued on a Cisco Router:
Router(configuration)#access-list 199 permit tcp host 10.1.1.1 host 172.16.1.1
Router(configuration)#access-list 199 permit tcp host 172.16.1.1 host 10.1.1.1
Router(configuration)#exit
Router#debug ip packet 199
What will the debug output on the console show?
A.
All IP packets passing through the router
B.
Only IP packets with the source address of 10.1.1.1
C.
All IP packets from 10.1.1.1 to 172.16.1.1
D.
All IP Packets between 10.1.1.1 and 172.16.1.1