Refer to the topology diagram shown in the exhibit and the partial configurations shown below.
Once the attack from 209.165.201.144/28 to 209.165.202.128/28 has been detected, which
additional configurations are required on the P1 IOS-XR router to implement source-based
remote-triggered black hole filtering?
!
router bgp 123
address-family ipv4 unicast
redistribute static route-policy test
!
A.
router static
address-family ipv4 unicast
209.165.202.128/28 null0 tag 666
192.0.2.1/32 null0 tag 667
!
route-policy test
if tag is 666 then
set next-hop 192.0.2.1
endif
if tag is 667 then
set community (no-export)
endif
end-policy
!
B.
router static
address-family ipv4 unicast
209.165.201.144/28 null0 tag 666
192.0.2.1/32 null0 tag 667
!
route-policy test
if tag is 666 then
set next-hop 192.0.2.1
endif
if tag is 667 then
set community (no-export)
endif
end-policy
!
C.
router static
address-family ipv4 unicast
209.165.201.144/28 null0 tag 666
192.0.2.1/32 null0
!
route-policy test
if tag is 666 then
set next-hop 192.0.2.1
set community (no-export)
endif
end-policy
D.
router static
address-family ipv4 unicast
209.165.202.128/28 null0 tag 666
192.0.2.1/32 null0
!
route-policy test
if tag is 666 then
set next-hop 192.0.2.1
set community (no-export)
endif
end-policy
!