which configuration mode?

In Cisco IOS-XR, the maximum-prefix command, to control the number of prefixes that can be
installed from a BGP neighbor, is configured under which configuration mode?

In Cisco IOS-XR, the maximum-prefix command, to control the number of prefixes that can be
installed from a BGP neighbor, is configured under which configuration mode?

A.
RP/0/RSP0/CPU0:P2(config-bgp)#

B.
RP/0/RSP0/CPU0:P2(config-bgp-af)#

C.
RP/0/RSP0/CPU0:P2(config-bgp-nbr)#

D.
RP/0/RSP0/CPU0:P2(config-bgp-nbr-af)#

Show Hint

Leave a Reply 2

Your email address will not be published. Required fields are marked *

jslaven

jslaven

IOS/XE:

router bgp 1
neighbor 1.1.1.1 remote-as 2
neighbor 1.1.1.1 maximum-prefix 10 70 restart 5
neighbor 2001:db8:128::130 remote-as 3
address famiily ipv6 unicast
neighbor 2001:db8:128::130 activate
neighbor 2001:db8:128::130 maximum-prefix 10 70 restart 5

XR:
router bgp 1
address-family ipv4 unicast
address-family ipv6 unicast
neighbor 1.1.1.1
remote-as 2
address-family ipv4 unicast
maximum-prefix 100000 80 restart 5
neighbor 2001:db8:132::134
remote-as 3
address-family ipv6 unicast
maximum-prefix 10000 80 restart 5

Reply

jslaven

jslaven

maximum-prefix 10, warn at 70% of 10 routes (7), restart BGP peering after 5 minutes

maximum-prefix 100000, warn at 80% of 100,000 routes (80,000), restart BGP peering after 5 minutes

Reply