which two methods can be used to exchange label information between the downstream CSC customer carrier and the CSC backbone carrier?

When implementing CSC services, which two methods can be used to exchange label information
between the downstream CSC customer carrier and the CSC backbone carrier? (Choose two.)

A.
using MP-BGP

B.
using RSVP

C.
using IGP and LDP

D.
using back-to-back VRF

E.
using front VRF and internal VRF

Explanation:

http://www.cisco.com/en/US/docs/net_mgmt/ip_solution_center/4.0/mpls/user/guide/9_iscqsg.html
Since the CSC-PE routers do not have to carry external routes in the VRF routing table, they can
use theincoming label in the packet to forward the customer carrier Internet traffic. Adding MPLS
to the routersprovides a consistent method of transporting packets from the customer carrier to the
backbone carrier. MPLSallows the exchange of an MPLS label between the CSC-PE and the
CSC-CE routers for every internalcustomer carrier route. The routers in the customer carrier have
all the external routes either through IBGP orroute redistribution to provide Internet connectivity.
When a backbone carrier and the customer carrier both provide BGP/MPLS VPN services, the

method oftransporting data is different from when a customer carrier provides only ISP services.
The following listhighlights those differences.
•When a customer carrier provides BGP/MPLS VPN services, its external routes are VPN-IPv4
routes. When acustomer carrier is an ISP, its external routes are IP routes.
•When a customer carrier provides BGP/MPLS VPN services, every site within the customer
carrier must useMPLS. When a customer carrier is an ISP, the sites do not need to use MPLS.