what two statements must be true?

Refer to the exhibit. On the basis of the output from the show ipv6 interface command, what
two statements must be true? (Choose two.)
RTA#show ipv6 ospf interfaces
<<output omitted>
!
Ethernet0/0 is up, line protocol is up
Link Local Address FE80:A8BB:CCFF:FE00:6E00, Interface ID 2
Area 0, Process ID 1, Instance ID 0, Router ID 10.10.10.1
Network Type BROADCAST, Cost: 10
MD5 Authenication SPI 500, secure socket state UP
(errors:0)
Transmit Delay is 1 sec, State DBR, Priority 1
Designated Router (ID) 11.11.11.1, local address
FE80:A8BB:CCFF:FE00:6F00
Backup Designated router (ID) 10.10.10.1, Local address
FE80:A8BB:CCFF:FE00:6E00
Timer intervals configured, Hello 10, Dead 40, Wait 40,
Retransmit 5
Hello is due in 00:00:01
Index 1/1/1, flood queue length 0
Next 0x0(0)/0x0(0)/0x0(0)
Last flood scan length is 1, maximum is 1
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 11.11.11.1 (Designated Router)
Suppress hello from 0 neighbor(s)

Refer to the exhibit. On the basis of the output from the show ipv6 interface command, what
two statements must be true? (Choose two.)
RTA#show ipv6 ospf interfaces
<<output omitted>
!
Ethernet0/0 is up, line protocol is up
Link Local Address FE80:A8BB:CCFF:FE00:6E00, Interface ID 2
Area 0, Process ID 1, Instance ID 0, Router ID 10.10.10.1
Network Type BROADCAST, Cost: 10
MD5 Authenication SPI 500, secure socket state UP
(errors:0)
Transmit Delay is 1 sec, State DBR, Priority 1
Designated Router (ID) 11.11.11.1, local address
FE80:A8BB:CCFF:FE00:6F00
Backup Designated router (ID) 10.10.10.1, Local address
FE80:A8BB:CCFF:FE00:6E00
Timer intervals configured, Hello 10, Dead 40, Wait 40,
Retransmit 5
Hello is due in 00:00:01
Index 1/1/1, flood queue length 0
Next 0x0(0)/0x0(0)/0x0(0)
Last flood scan length is 1, maximum is 1
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 11.11.11.1 (Designated Router)
Suppress hello from 0 neighbor(s)

A.
Interface Ethernet 0/0 was configured with theipv6 ospf 1 area 1 command.

B.
Interface Ethernet 0/0 has been configured with theipv6 ospf authentication
ipsec spi 500 md5command.

C.
OSPF version 3 is enabled to support IPv6.

D.
The IP address of the designated router (DR) is FE80::A8BB:CCFF:FE00:6E00.

E.
This is the designated router (DR) on the Ethernet 0/0 link.



Leave a Reply 0

Your email address will not be published. Required fields are marked *