Study the configuration presented in the exhibit carefully. What is the objective of the route
map named test?
router bgp 50001
network 10.0.0.0
network 172.16.0.0
neighbor 10.1.1.1 remote-as 5003
neighbor 10.1.1.1 route-map test out
!
access-list 1 permit 10.0.0.0
access-list 2 permit any
!
route-map test permit 10
match ip address 1
set metric 200
!
route-map test permit 20
match ip address 2
A.
marks all prefixes received from the 10.1.1.1 neighbor with a MED of 200
B.
marks the 10.0.0.0/8 prefix received from the 10.1.1.1 neighbor with a MED of 200
C.
marks the 10.0.0.0/8 prefix advertised to the 10.1.1.1 neighbor with a MED of 200
D.
marks all prefixes advertised to the 10.1.1.1 neighbor with a MED of 200
Explanation:
From the command “neighbor 10.1.1.1 route-map test out” we learn the “test” route map is
applied on the outbound direction to the neighbor 10.1.1.1. In the “test” route map, we see 3
statements:
“route-map test permit 10
match ip address 1
set metric 200″
They mean “if the access list 1 is matched, set theMulti Exit Discriminator (MED) of that
route to 200″.