What are the default settings of the Cisco IMCCIMC NIC properties on a standalone Cisco UCS CSeries server?
A.
‘Shared LOM’ NIC mode with ‘Active-active’ NIC redundancy and DHCP enabled
B.
‘Shared LOM’ NIC mode with ‘Active-standby’ NIC redundancy and DHCP enabled
C.
‘Dedicated’ NIC mode with ‘Active-standby’ NIC redundancy DHCP disabled
D.
‘Dedicated’ NIC mode with ‘None’ NIC redundancy and DHCP enabled
E.
‘Cisco Card’ NIC mode with ‘Active-active’ NIC redundancy and DHCP enabled
http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C220/install/install.html#wp1400933
Shared LOM EXT (default)—This is shared LOM extended mode. This is the factory-default setting, along with Active-active NIC redundancy and DHCP-enabled. With this mode, the shared LOM and Cisco Card interfaces are both enabled.
Dedicated NIC mode with None NIC redundancy and DHCP enabled….
so, who’s the right answer?
A is correct
somebody says D is answer……which is correct A or D?
Looking at all the installation documents for several C series servers I come up with the same answer as DM
Shared LOM EXT (default)—This is shared LOM extended mode. This is the factory-default setting, along with Active-active NIC redundancy and DHCP-enabled. With this mode, the shared LOM and Cisco Card interfaces are both enabled.
I have however seen screenshots which show the NIC redundancy as none in examples of configuring this I would go with what Cisco says in it installation guides keeping in mind the fact that this is looking at the factory defaults so I would also say A is correct
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C210M1/install/C210M1/install.html
For Most of the servers as per the cisco documentation the answer should be A but the server C3160 as per cisco doc should have answer to this question as option D.
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C3160/install/C3160/install.html
New 642-999 exam questions MOW are available here:
http://www.mcsdbible.com/new-exam-dumps-passleader-quality-new-135q-642-999-exam-questions-for-free.html
New 642-999 Exam Questions Updated Recently (29/June/2017):
NEW QUESTION 177
Which two statements describe effects of enabling a Cisco UCS Fabric Interconnect in Ethernet end-host mode? (Choose two.)
A. MAC address learning is disabled on the uplink ports of the fabric interconnect.
B. MAC address learning is enabled on the server ports of the fabric interconnect.
C. Server-to-server communication on the same VLAN is not performed locally VIE Fabric Interconnect, but requires an external switch.
D. By default, unicast traffic received by the fabric uplink port to unknown destination MAC addresses is forwarded to all of the server ports.
E. MAC address learning is disabled on all of the ports in Ethernet end-host mode.
Answer: BC
NEW QUESTION 178
Which parameter can be configured during the initial system setup of Cisco UCS Fabric Interconnect from the CLI, without restoring the configuration from an existing backup?
A. the server ports, network ports, and storage ports
B. the reserved VLAN IDs
C. the default number of dynamic vNICs
D. standalone mode or cluster mode of the Fabric Interconnects
Answer: D
NEW QUESTION 179
Which two parameters must be configured on a standalone Cisco UCS C-Series Server to export the technical support data to a remote server? (Choose two.)
A. Specify a remote TFTP server IP address
B. Install a certificate
C. Install an FTP server
D. Set the source as the UCS server IP address
E. Specify the remote relative path and file name
Answer: AE
NEW QUESTION 180
……
NEW QUESTION 181
A Cisco UCS administrator configuring QoS, which two options are valid QoS system classes in a Cisco UCS blade system? (Choose two.)
A. drop eligible
B. transactaional data
C. best effort
D. scavenger
E. Fibre Channel
Answer: CE
NEW QUESTION 182
Which options is the only supported link aggregation protocol on Cisco UCS Manager?
……
NEW QUESTION 184
Which drive combination prevents you from provisioning RAID on Cisco UCS C-Series servers?
A. SAS HDD and SATA HDD
B. SAS SSD and SATA SSD
C. SATA HDD and SATA SSD
D. SAS HDD only
E. SATA HDD only
Answer: C
……
NEW QUESTION 186
Which two AAA protocols are supported by a remote AAA database? (Choose two.)
A. Microsoft Active Directory
B. RADIUS
C. 802.1X
D. Kerberos
E. LDAP
Answer: BE
NEW QUESTION 187
……
P.S. These New 642-999 Exam Questions Were Just Updated From The Real 642-999 Exam, You Can Get The Newest 642-999 Dumps In PDF And VCE From — http://www.passleader.com/642-999.html (195q VCE and PDF)
Good Luck!
BTW, part of the new 195Q 642-999 dumps are available here:
https://drive.google.com/open?id=0B-ob6L_QjGLpQVQ1ZUc4Znh6V00
Best Regards!
Answer must be D only.
None of the C series server has Shared LOM as default setting, server is shipped with Shared LOM extension as default and as Michael Churchill said C3160 comes with Dedicated mode with None redundancy therefore the option D is the only correct option.