Which ports can access the Cisco IMC if you select Shared LOM NIC mode in the Cisco IMC Configuration Utility for a Cisco UCS C-Series server?

Which ports can access the Cisco IMC if you select Shared LOM NIC mode in the Cisco IMC
Configuration Utility for a Cisco UCS C-Series server?

Which ports can access the Cisco IMC if you select Shared LOM NIC mode in the Cisco IMC
Configuration Utility for a Cisco UCS C-Series server?

A.
the ports on an installed Cisco network adapter card

B.
the two 1-Gb Ethernet ports

C.
the two 10/100 management ports

D.
the two 10/100 management ports, but each port has a default setting

Show Hint

Leave a Reply 3

Your email address will not be published. Required fields are marked *

Michael Churchill

Michael Churchill

–Dedicated—The 10/100 management port is used to access the CIMC. You have to select a NIC redundancy and IP setting.

–Shared LOM (default)—The two 1Gb Ethernet ports are used to access the CIMC. This is the factory default setting, along with Active-active NIC redundancy and DHCP enabled.

–Cisco Card—The ports on an installed Cisco network adapter card are used to access the CIMC. You have to select a NIC redundancy and IP setting..

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C210M1/install/C210M1/install.html

So B is correct

Reply

Mustapha Ragga

Mustapha Ragga

New 642-999 Exam Questions and Answers (29/June/2017 Updated):

NEW QUESTION 177
Which two statements describe effects of enabling a Cisco UCS Fabric Interconnect in Ethernet end-host mode? (Choose two.)

A. MAC address learning is disabled on the uplink ports of the fabric interconnect.
B. MAC address learning is enabled on the server ports of the fabric interconnect.
C. Server-to-server communication on the same VLAN is not performed locally VIE Fabric Interconnect, but requires an external switch.
D. By default, unicast traffic received by the fabric uplink port to unknown destination MAC addresses is forwarded to all of the server ports.
E. MAC address learning is disabled on all of the ports in Ethernet end-host mode.

Answer: BC

NEW QUESTION 178
Which parameter can be configured during the initial system setup of Cisco UCS Fabric Interconnect from the CLI, without restoring the configuration from an existing backup?

A. the server ports, network ports, and storage ports
B. the reserved VLAN IDs
C. the default number of dynamic vNICs
D. standalone mode or cluster mode of the Fabric Interconnects

Answer: D

NEW QUESTION 179
Which two parameters must be configured on a standalone Cisco UCS C-Series Server to export the technical support data to a remote server? (Choose two.)

A. Specify a remote TFTP server IP address
B. Install a certificate
C. Install an FTP server
D. Set the source as the UCS server IP address
E. Specify the remote relative path and file name

Answer: AE

NEW QUESTION 180
……

NEW QUESTION 181
A Cisco UCS administrator configuring QoS, which two options are valid QoS system classes in a Cisco UCS blade system? (Choose two.)

A. drop eligible
B. transactaional data
C. best effort
D. scavenger
E. Fibre Channel

Answer: CE

NEW QUESTION 182
Which options is the only supported link aggregation protocol on Cisco UCS Manager?
……

NEW QUESTION 184
Which drive combination prevents you from provisioning RAID on Cisco UCS C-Series servers?

A. SAS HDD and SATA HDD
B. SAS SSD and SATA SSD
C. SATA HDD and SATA SSD
D. SAS HDD only
E. SATA HDD only

Answer: C

……

NEW QUESTION 186
Which two AAA protocols are supported by a remote AAA database? (Choose two.)

A. Microsoft Active Directory
B. RADIUS
C. 802.1X
D. Kerberos
E. LDAP

Answer: BE

NEW QUESTION 187
……

P.S. Get The Newest 642-999 Dumps In PDF And VCE From — http://www.passleader.com/642-999.html (195q VCE and PDF)

Good Luck!

Reply