After staging a VEM file on a VMware ESXi 5.0 host in the /tmp directory, what is the correct
command syntax to install the VEM?
A.
esxcli software vib install �d /tmp/VEM500-20110825132140-BG-release.zip
-maintenance-mode
B.
esxcli software vib install �v /tmp/VEM500-20110825132140-BG-release.zip
-maintenance-mode
C.
esxupdate software vib install �d /tmp/VEM500-20110825132140-BG-release.zip
-maintenance-mode
D.
esxupdate software vib install �v /tmp/VEM500-20110825132140-BG-release.vib
-maintenance-mode
This is a weird question to install VEM seem to mean doing the below
Install VEM on an ESXi 4.x and 5.x host
To install Cisco Virtual Ethernet Module (VEM) on an ESXi 4.x and 5.x host using the command line:
1.Copy the Cisco VEM to the ESX host using the vSphere Client File Upload feature.This copies the .vib file to the ESX datastore.
2.Log in to the ESXi host as a user with administrator privileges.
3.Determine the datastore path so you can change directory to that path.
4.Run this command and determine the datastore path:
# vdf
5.Change directory to the location of the installer file using this command
f:
# cd /vmfs/volumes/
6.The .vib file for the VEM can be installed on the ESXi host using:
ESXi 5.x: # esxcli software vib install v /vmfs/volumes//cross_cisco-vem-v131-4.2.1.1.4.1.0-3.0.4.vib
So taking this answer B would look correct or the closes to the command in the document
This taken from
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1013551
ESXUPDATE is a command for earlier version of ESXi
But the following command is doing installtion from a vib file. right?
esxcli software vib install -v
And the following command doing it from local system and zip file. correct ?
esxcli software vib install -d
So answer should be option A
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_2_1_s_v_1_5_1/install_upgrade/vsm_vem/guide/n1000v_installupgrade/n1000v_installupgrade_install.html
The question is weird because it talk about installing the VEM on a ESXi 5.0 host if you take a look at the document in Junn link there are two cli processes listed
Installing VEM Software Locally on a VMware 5.0 Host by Using the CLI
PROCEDURE
Step 1 Copy the VEM software to the /tmp directory.
Step 2 Enter the following command.
esxcli software vib install -v /tmp/VIB_FILE
For example:
esxcli software vib install -v /tmp/cross_cisco-vem-v140-4.2.1.1.5.1.0-3.0.1.vib
Installation Result
Message: Operation finished successfully.
Reboot Required: false
VIBs Installed: Cisco_bootbank_cisco-vem-v140-esx_4.2.1.1.5.1.0-3.0.1
VIBs Removed:
VIBs Skipped:
However for installing it on a stateless server
Installing the VEM Software on a Stateless ESXi Host Using esxcli
Step 1 Display the VMware version and build number.
~ # vmware -v
VMware ESXi 5.0.0 build-441354
~ #
~ # vmware -l
VMware ESXi 5.0.0 GA
Step 2 Log in to the ESXi stateless host.
Step 3 Copy the offline bundle to the host.
~ # esxcli software vib install -d
/vmfs/volumes/newnfs/MN-VEM/VEM500-20110728153-BG-release.zip
Installation Result
Message: WARNING: Only live system was updated, the change is not persistent.
Reboot Required: false
VIBs Installed: Cisco_bootbank_cisco-vem-v131-esx_4.2.1.1.4.1.0-3.0.5
VIBs Removed:
VIBs Skipped:
Now this has the zip file extension listed in the answers but is for stateless servers so it could be either A or B
A refers to installing it on a stateless host
B refers to installing it on a ESXi host
The .zip extension point to A being correct but the question seem to refer to ESXi so B would be correct
Guess when it comes to the exam you need to look at what the extension says as Junn say to install a zip file seem to need the d command
https://pubs.vmware.com/vsphere-50/index.jsp?topic=%2Fcom.vmware.vcli.ref.doc_50%2Fesxcli_software.html
software vib install
–depot | -d
Specifies full remote URLs of the depot index.xml or server file path pointing to an offline bundle .zip file.
mlb shop promotional code mlb shop promo code 20 off nba shop promotional code – maritime-marionettes.ca,
(29/June/2017 Updated) New 642-999 Exam Questions:
NEW QUESTION 178
Which parameter can be configured during the initial system setup of Cisco UCS Fabric Interconnect from the CLI, without restoring the configuration from an existing backup?
A. the server ports, network ports, and storage ports
B. the reserved VLAN IDs
C. the default number of dynamic vNICs
D. standalone mode or cluster mode of the Fabric Interconnects
Answer: D
NEW QUESTION 179
Which two parameters must be configured on a standalone Cisco UCS C-Series Server to export the technical support data to a remote server? (Choose two.)
A. Specify a remote TFTP server IP address
B. Install a certificate
C. Install an FTP server
D. Set the source as the UCS server IP address
E. Specify the remote relative path and file name
Answer: AE
NEW QUESTION 180
……
NEW QUESTION 181
A Cisco UCS administrator configuring QoS, which two options are valid QoS system classes in a Cisco UCS blade system? (Choose two.)
A. drop eligible
B. transactaional data
C. best effort
D. scavenger
E. Fibre Channel
Answer: CE
NEW QUESTION 182
Which options is the only supported link aggregation protocol on Cisco UCS Manager?
A. Multipath
B. PagP
C. FLOGI
D. LACP
E. FCOE
Answer: D
NEW QUESTION 183
……
NEW QUESTION 184
Which drive combination prevents you from provisioning RAID on Cisco UCS C-Series servers?
C. SATA HDD and SATA SSD
……
NEW QUESTION 186
Which two AAA protocols are supported by a remote AAA database? (Choose two.)
A. Microsoft Active Directory
B. RADIUS
C. 802.1X
D. Kerberos
E. LDAP
Answer: BE
NEW QUESTION 187
……
You Can Get The Newest 642-999 Dumps In PDF And VCE From — http://www.passleader.com/642-999.html (195q VCE and PDF)
Good Luck!
What’s more, part of new 195Q 642-999 dumps are available here:
https://drive.google.com/open?id=0B-ob6L_QjGLpQVQ1ZUc4Znh6V00
Best Regards!