How does a Cisco Unified Computing System react when configured for disjoint Layer 2 domains?

How does a Cisco Unified Computing System react when configured for disjoint Layer 2 domains?

How does a Cisco Unified Computing System react when configured for disjoint Layer 2 domains?

A.
Automatic pinning is disabled; VLAN membership must be statically pinned to the uplink ports.

B.
VLANs must be divided between the fabric interconnects using PIN groups.

C.
The VLAN traffic for a disjoint network can only travel along an uplink that is specifically
assigned to this VLAN and is selectively excluded from all other uplinks.

D.
When you configure disjoint Layer 2 networks, you must assign VLANs to uplink interfaces.



Leave a Reply 4

Your email address will not be published. Required fields are marked *


Michael Churchill

Michael Churchill

The configuration for disjoint L2 networks works on a principle of selective exclusion. Traffic for a VLAN that is designated as part of a disjoint network can only travel along an uplink Ethernet port or port channel that is specifically assigned to that VLAN, and is selectively excluded from all other uplink ports and port channels. However, traffic for VLANs that are not specifically assigned to an uplink Ethernet port or port channel can still travel on all uplink ports or port channels, including those that carry traffic for the disjoint L2 networks

So the answer looks to be C

see

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_010101.html

jrld

jrld

Hi Michael,
Can you do me a favour ? please answer the correct answer of Q 71.

What are the default settings of the Cisco IMCCIMC NIC properties on a standalone Cisco UCS CSeries server?

Brett Goldstein

Brett Goldstein

New 642-999 Exam Questions Updated Recently (29/June/2017):

NEW QUESTION 179
Which two parameters must be configured on a standalone Cisco UCS C-Series Server to export the technical support data to a remote server? (Choose two.)

A. Specify a remote TFTP server IP address
B. Install a certificate
C. Install an FTP server
D. Set the source as the UCS server IP address
E. Specify the remote relative path and file name

Answer: AE

NEW QUESTION 180
Which parameter can be configured during the initial system setup of Cisco UCS Fabric Interconnect from the CLI, without restoring the configuration from an existing backup?

A. the server ports, network ports, and storage ports
B. the reserved VLAN IDs
C. the default number of dynamic vNICs
D. standalone mode or cluster mode of the Fabric Interconnects

Answer: D

NEW QUESTION 181
A Cisco UCS administrator configuring QoS, which two options are valid QoS system classes in a Cisco UCS blade system? (Choose two.)

A. drop eligible
B. transactaional data
C. best effort
D. scavenger
E. Fibre Channel

Answer: CE

NEW QUESTION 182
Which options is the only supported link aggregation protocol on Cisco UCS Manager?

A. Multipath
B. PagP
C. FLOGI
D. LACP
E. FCOE

Answer: D

NEW QUESTION 183
Which two statements describe effects of enabling a Cisco UCS Fabric Interconnect in Ethernet end-host mode? (Choose two.)

A. MAC address learning is disabled on the uplink ports of the fabric interconnect.
B. MAC address learning is enabled on the server ports of the fabric interconnect.
C. Server-to-server communication on the same VLAN is not performed locally VIE Fabric Interconnect, but requires an external switch.
D. By default, unicast traffic received by the fabric uplink port to unknown destination MAC addresses is forwarded to all of the server ports.
E. MAC address learning is disabled on all of the ports in Ethernet end-host mode.

Answer: BC

NEW QUESTION 184
Which drive combination prevents you from provisioning RAID on Cisco UCS C-Series servers?

A. SAS HDD and SATA HDD
B. SAS SSD and SATA SSD
C. SATA HDD and SATA SSD
D. SAS HDD only
E. SATA HDD only

Answer: C

NEW QUESTION 185
……

NEW QUESTION 186
Which two AAA protocols are supported by a remote AAA database? (Choose two.)

A. Microsoft Active Directory
B. RADIUS
C. 802.1X
D. Kerberos
E. LDAP

Answer: BE

NEW QUESTION 187
……

P.S. These New 642-999 Exam Questions Were Just Updated From The Real 642-999 Exam, You Can Get The Newest 642-999 Dumps In PDF And VCE From — http://www.passleader.com/642-999.html (195q VCE and PDF)

Good Luck!