Your x86-based system with Solaris 10 OS installed on it is not booting correctly. You think the
problem might be that a BIOS setting is not correctly configured.
What should you do to abort the boot process and reboot into the BIOS configuration menu?
A.
You press the Ctrl-Alt-Del keys and reboot the system, or press the reset button. When the
screen tells indicates the key to enter the BIOS, you press it and examine your BIOS settings.
B.
You press the middle mouse button. When the screen times out, you enter the BIOS
configuration menu and examine the BIOS settings.
C.
You press the Stop-A keys then type reset-all. You reboot directly into the BIOS configuration
menu and examine the BIOS settings.
D.
While holding down the reset button, you power cycle the system.
Explanation: