What command would you run to establish this information?

Check the state of acceleration (enabled or disabled):

[Expert@GW]# fwaccel stat

Check the existing connections in the SecureXL device:

[Expert@GW]# fwaccel conns

Output can be filtered by the flags (run the ‘fwaccel conns -h’ command):

F / f = Forward to Firewall – The connection is not accelerated and must be inspected by Firewall kernel.
U / u = Unidirectional – The connection can accelerate data packets on either C2S (Client-to-Server), or S2C (Server-to-Client). Data packets from the opposite direction will be forwarded to the Firewall Kernel.
N / n = NAT is being performed on the connection by the acceleration device.
A / a = Accounting is performed on the connection (either rulebase accounting, or SmartView Monitor is viewing the connection).
C / c = Encryption is done on the connection by the acceleration device.
P / p = The connection is partial / is not partial.
S / s = The connection is PXL enabled / is PXL disabled.
W / w = The connection is in wire mode.

Check the number of connections handled by the SecureXL device:

[Expert@GW]# fwaccel conns -s

Check the acceleration statistics:

[Expert@GW]# fwaccel stats
Shows various number of connections accelerated, F2F and VPN acceleration.

[Expert@GW]# fwaccel stats -s
Displays a summary of connections accelerated versus non-accelerated.

Check whether specific traffic utilizes the Accept Templates feature:

[Expert@GW]# fwaccel templates

Look for the template that matches the specific traffic.

Check how many connections the Firewall has detected for the SecureXL device:

[Expert@GW]# fw tab -t cphwd_db -s