Review the cphaprob state command output from one New Mode High Availability ClusterXL
member.
Which member will be active after member 192.168.1.2 fails over and is rebooted?
A.
Both members’ state will be in collision.
B.
Both members’ state will be active.
C.
192.168.1.1
D.
192.168.1.2
no picture
The image is located here:
http://cdn.aiotestking.com/wp-content/uploads/156-315-13/12.jpg
something like this:
cluster mode : new HA (active up)
number unique IP Assign load state
1 (local) 192.168.1.1 0% standby
2 192.168.1.2 100% active
c
..assuming that Cluster Properties in Smart Dashboard are not changed as you can set priority in “Cluster Member” branch and then modify “ClusterXL and VRRP” branch to “Switch to higher priority Cluster Member”
Yes. If it says active up in brackets then it maintains active member. If it would be Primary up then it fails over back to the one listed as number one. Scenario would look like this:
cluster mode : new HA (Primary up)
number unique IP Assign load state
1 (local) 192.168.1.1 100% active
2 192.168.1.2 0% standby
Then question would be:
Which member will be active after member 192.168.1.1 fails over and is rebooted?
Agree.
C. if cluster mode : new HA (active up)
https://sc1.checkpoint.com/documents/R77/CP_R77_ClusterXL_WebAdminGuide/7292.htm
“High Availability”
Upon Security Gateway recovery, you can maintain the current active Security Gateway (Active Up), or to change to the highest priority Security Gateway (Primary Up).
C. 192.168.1.1
Assuming the default settings (since the question did not mention any change) if a member fails w/c is:
“Maintain current active cluster member” this means that whosoever is active will remain active
regardless of priority
Then answer is C
For the benefit of everyone, there are two choices:
Maintain current active cluster member(DEFAULT)
OR
Switch to higher priority Cluster Member
Wrote 156-315.77 last Friday, and passed with 95%!
There were 89 questions of my 156-315.77 exam, many Fill in the Blank questions.
Around 10-15 new questions (IPS, Threat Prevention FW Monitor, VPN Tunnel Sharing, GAiA…etc.).
Be careful of questions on Command and Syntax, GAiA Command.
I used the PassLeader 156-315.77 dumps (http://www.passleader.com/156-315-77.html) (752q VCE and PDF dumps) for preparing for exam, all NEW questions were from it, the most valid 156-315.77 dumps!
P.S.
PassLeader has published part of its 156-315.77 dumps on Google Drive for free here:
https://drive.google.com/open?id=0B-ob6L_QjGLpMm1FNVVkSEZZR3c
Good Luck!!!