Which firewall filter configuration do you use?

Referring to the exhibit, you are asked to rate-limit traffic from Web-Server to the subnet
where Mal-User is located. All other traffic should be permitted.
Which firewall filter configuration do you use?

Referring to the exhibit, you are asked to rate-limit traffic from Web-Server to the subnet
where Mal-User is located. All other traffic should be permitted.
Which firewall filter configuration do you use?

A.
[edit firewall]
user@router# show
policer LIMIT-MAL-USER {
if-exceeding {
bandwidth-limit 400k;
burst-size-limit 100k;
}
then discard;
}
family inet {
filter STOP-MAL-USER {
term one {
from {
source-address {
100.100.100.10/32;
}
destination-address {
200.200.200.0/24;
}}
then policer LIMIT-MAL-USER;
}
term two {
then accept;
}}}

B.
[edit firewall]
user@router# show
policer LIMIT-BAD-USER {
if-exceeding {
bandwidth-limit 400k;
burst-size-limit 100k;
}
then discard;
}
family inet {
filter STOP-MAL-USER {
term one {
from {
source-address {
100.100.100.10/32;
}
destination-address {
200.200.200.0/24;
}}
then policer LIMIT-MAL-USER;
}
term two {

then accept;
}}}

C.
[edit firewall]
user@router# show
policer LIMIT-MAL-USER {
if-exceeding {
bandwidth-limit 400k;
burst-size-limit 100k;
}
then discard;
}
family inet {
filter STOP-MAL-USER {
term one {
from {
source-address {
100.100.100.10/32;
}
destination-address {
200.200.200.0/24;
}}
then policer LIMIT-MAL-USER;
}
term two {
then reject;
}}}

D.
[edit firewall]
user@router# show
policer LIMIT-MAL-USER {
if-exceeding {
bandwidth-limit 400k;
burst-size-limit 100k;
}
then discard;
}
family inet {
filter STOP-MAL-USER {
term one {
from {
source-address {
200.200.200.0/24;
}
destination-address {
100.100.100.10/32;
}}

then policer LIMIT-MAL-USER;
}
term two {
then accept;
}}}



Leave a Reply 0

Your email address will not be published. Required fields are marked *