Which statement describes exception traffic?
A.
Exception traffic must be sent to the PFE for processing.
B.
Exception traffic enters one ingress port and is sent out multiple egress ports.
C.
Exception traffic is rate-limited on the internal link to prevent DoS attacks.
D.
Exception traffic is processed after forwarding traffic when congestion exists.
Sites of interest we have a link to.
here are some hyperlinks to websites that we link to mainly because we feel they are worth visiting
here are some hyperlinks to websites that we link to simply because we believe they’re really worth visiting
although internet websites we backlink to below are considerably not associated to ours, we really feel they’re in fact worth a go through, so have a look
Wonderful story, reckoned we could combine some unrelated information, nonetheless actually worth taking a look, whoa did a single discover about Mid East has got a lot more problerms also
Every when inside a although we select blogs that we read. Listed below would be the latest websites that we decide on
the time to study or pay a visit to the content material or sites we’ve linked to below the
although internet websites we backlink to beneath are considerably not associated to ours, we feel they may be really really worth a go by means of, so have a look
Every when in a though we pick blogs that we study. Listed below would be the most current web sites that we choose
Here is a good Weblog You might Locate Interesting that we Encourage You
please visit the web pages we follow, like this one particular, because it represents our picks through the web
below youll discover the link to some web pages that we feel you should visit
Here is a superb Blog You might Locate Intriguing that we Encourage You
New JN0-102 Exam Questions and Answers Updated Recently (8/May/2017):
NEW QUESTION 358
Which two statements describe the default behavior for OSPF? (Choose two.)
A. OSPF imports all routes into the inet4.0 routing table.
B. OSPF exports all static routes into the OSPF database.
C. OSPF imports all routes into the inet.0 routing table.
D. OSPF does not export static routes into the OSPF database.
Answer: CD
NEW QUESTION 359
Which two ping command parameters whould be used to troubleshoot MTU issues? (Choose two.)
A. ping do-not-fragment
B. ping rapid
C. ping verbose
D. ping size
Answer: AD
NEW QUESTION 360
Which command prompt indicates that you are in operational mode?
A. user @ router &
B. user @ router #
C. user @ router $
D. user @ router >
Answer: D
NEW QUESTION 361
Which keystroke combination allows users to move the cursor to the beginning of the command line without deleting text?
A. Ctrl + u
B. Ctrl + w
C. Ctrl + a
D. Ctrl + b
Answer: C
NEW QUESTION 362
What is the subnet mask for the 172.45.32.6/19 address?
A. 255.255.224.0
B. 255.255.240.0
C. 255.224.0.0
D. 255.240.0.0
Answer: A
NEW QUESTION 363
……
NEW QUESTION 364
What is the default firewall filter behavior when a term is matched but no terminating action is specified?
A. an implicit deny and the filter evaluation terminates
B. an implicit accept and the filter evaluation terminates
C. an implicit accept and the filter evaluation continues to the next term
D. an implicit deny and the filter evaluation continues to the next term
Answer: C
NEW QUESTION 365
What are three interface prefixes for a 40-gigabit interface? (Choose three.)
A. et
B. es
C. fte
D. xe
E. xle
Answer: ……
NEW QUESTION 366
Which source of routing information is preferred by default?
……
Answer: C
NEW QUESTION 367
For the interface ge-1/2/3.4, what does “ge” represent?
A. SONET/SDH
B. Gigabit Ethernet
C. Aggregated Ethernet
D. GRE
Answer: B
NEW QUESTION 368
Which word starts a command to display the operational status of a Junos device?
A. put
B. set
C. show
D. get
Answer: C
NEW QUESTION 369
……
etc.
P.S. These New JN0-102 Exam Questions Were Just Updated From The Real JN0-102 Exam, You Can Get The Newest JN0-102 Dumps In PDF And VCE From — http://www.passleader.com/jn0-102.html (408q VCE and PDF)
Good Luck!
Besides, some new JN0-102 exam questions from that 408Q JN0-102 dumps are available here:
https://drive.google.com/open?id=0B-ob6L_QjGLpSmYwaTA1elptOUE
Best Regards!
New JN0-102 Exam Questions and Answers Updated Recently (8/May/2017):
NEW QUESTION 358
Which two statements describe the default behavior for OSPF? (Choose two.)
A. OSPF imports all routes into the inet4.0 routing table.
B. OSPF exports all static routes into the OSPF database.
C. OSPF imports all routes into the inet.0 routing table.
D. OSPF does not export static routes into the OSPF database.
Answer: CD
NEW QUESTION 359
Which two ping command parameters whould be used to troubleshoot MTU issues? (Choose two.)
A. ping do-not-fragment
B. ping rapid
C. ping verbose
D. ping size
Answer: AD
NEW QUESTION 360
Which command prompt indicates that you are in operational mode?
A. user @ router &
B. user @ router #
C. user @ router $
D. user @ router >
Answer: D
NEW QUESTION 361
Which keystroke combination allows users to move the cursor to the beginning of the command line without deleting text?
A. Ctrl + u
B. Ctrl + w
C. Ctrl + a
D. Ctrl + b
Answer: C
NEW QUESTION 362
What is the subnet mask for the 172.45.32.6/19 address?
A. 255.255.224.0
B. 255.255.240.0
C. 255.224.0.0
D. 255.240.0.0
Answer: A
NEW QUESTION 363
Click the Exhibit button. Referring to the exhibit, what happens when ping packets are sent to the management interface address of the local router?
user@router> show route protocol static
inet.0: 15 destinations, 15 routes (15 active, 0 holddown, 0 hidden)
+ = Active Route, – = Last Active, * = Both
99.0.0.0/17 *[Static/5] 00:00:11
————— > to 10.1.1.2 via ge-0/0/1.0
99.0.0.0/19 *[Static/5] 00:00:11
————— > to 10.1.2.2 via ge-0/0/2.0
99.0.0.0/24 *[Static/5] 00:00:11
————— > to 10.1.3.2 via ge-0/0/3.0
99.0.0.0/26 *[Static/5] 00:00:11
————— > to 10.1.4.2 via ge-0/0/4.0
Referring to the exhibit, which next-hop interface will be used to reach the 10.21.14.16 destination?
A. ge-0/0/1.0
B. ge-0/0/0.0
C. ge-0/0/3.0
D. ge-0/0/2.0
Answer: A
NEW QUESTION 364
What is the default firewall filter behavior when a term is matched but no terminating action is specified?
A. an implicit deny and the filter evaluation terminates
B. an implicit accept and the filter evaluation terminates
C. an implicit accept and the filter evaluation continues to the next term
D. an implicit deny and the filter evaluation continues to the next term
Answer: C
NEW QUESTION 365
What are three interface prefixes for a 40-gigabit interface? (Choose three.)
A. et
B. es
C. fte
D. xe
E. xle
Answer: ABE
NEW QUESTION 366
Which source of routing information is preferred by default?
A. static
B. RIP
C. direct
D. BGP
Answer: C
NEW QUESTION 367
For the interface ge-1/2/3.4, what does “ge” represent?
A. SONET/SDH
B. Gigabit Ethernet
C. Aggregated Ethernet
D. GRE
Answer: B
NEW QUESTION 368
Which word starts a command to display the operational status of a Junos device?
A. put
B. set
C. show
D. get
Answer: C
NEW QUESTION 369
……
P.S. These New JN0-102 Exam Questions Were Just Updated From The Real JN0-102 Exam, You Can Get The Newest JN0-102 Dumps In PDF And VCE From — http://www.passleader.com/jn0-102.html (408q VCE and PDF)
Good Luck!
Besides, part of that new 408Q JN0-102 dumps are available here:
https://drive.google.com/open?id=0B-ob6L_QjGLpSmYwaTA1elptOUE
Best Regards!