Which two can be used to create and apply an export policy that advertises static routes to RIP
neighbors? (Choose two.)
A.
set protocols rip export demo
B.
edit policy-options policy-statement demo
set term 1 from protocol static
set term 1 then accept
C.
edit policy-options policy-statement demo
set term 1 from protocol static accept
D.
set protocols rip group internal export demo
Shouldn’t it be A & B?
https://www.juniper.net/techpubs/en_US/junos12.3/topics/usage-guidelines/policy-applying-routing-policies-and-policy-chains-to-routing-protocols.html
To apply one or more routing policies to a routing protocol, include the import and export statements:
import [ policy-names ];
export [ policy-names ];
You can include the statements at the following hierarchy levels:
[edit protocols protocol-name]
[edit logical-systems logical-system-name protocols protocol-name]
Answer to my question above is: NO, B & D are correct
The Junos OS configuration requires that all RIPv2 neighbors be part of a group, which you define with the group keyword. Here, the group has a name of user-group, but you can name it almost anything you like. For a simple network, you can configure all the RIPv2 interfaces and routers to be in a single group. If you want to enable RIPv2 packet authentication and want routers to have different passwords, you need to configure the routers to be in different groups.
Passed JN0-102 exam last weekend with a score of 98%!
Got 70 multiple-choice questions, most of them were not difficult, they were mainly on:
1. Networking Fundamentals (Layer 2, Layer 3, IPv4 and IPv6)
2. Junos OS Fundamentals
3. User Interfaces (CLI functionality/modes/navigation/help)
4. Junos Configuration Basics (Additional initial configuration elements – NTP, SNMP, syslog, etc.)
5. Operational Monitoring and Maintenance (Show/Monitor commands, ping, traceroute, telnet, SSH, etc., Root password recovery)
6. Routing Fundamentals (Routing tables/preference/instances, Routing vs. forwarding tables)
7. Routing Policy and Firewall Filters
I learned valid JN0-102 dumps/JN0-102 VCE dumps/JN0-102 PDF dumps from here: https://tr.im/1q70g (I got that Complete Version JN0-102 dumps, 100% valid now!)
P.S. Here are some free JN0-102 dumps collection: https://tr.im/1TPco (its JN0-102 VCE dumps and JN0-102 PDF dumps are good materials for passing the JN0-102 exam)
Hope you can pass the JN0-102 exam easily! Good Luck!
New JN0-102 Exam Questions Updated Recently (8/May/2017):
NEW QUESTION 360
Which command prompt indicates that you are in operational mode?
A. user @ router &
B. user @ router #
C. user @ router $
D. user @ router >
Answer: D
NEW QUESTION 361
Which keystroke combination allows users to move the cursor to the beginning of the command line without deleting text?
A. Ctrl + u
B. Ctrl + w
C. Ctrl + a
D. Ctrl + b
Answer: C
NEW QUESTION 362
What is the subnet mask for the 172.45.32.6/19 address?
A. 255.255.224.0
B. 255.255.240.0
C. 255.224.0.0
D. 255.240.0.0
Answer: A
NEW QUESTION 363
Click the Exhibit button. Referring to the exhibit, what happens when ping packets are sent to the management interface address of the local router?
user@router> show route protocol static
inet.0: 15 destinations, 15 routes (15 active, 0 holddown, 0 hidden)
+ = Active Route, – = Last Active, * = Both
99.0.0.0/17 *[Static/5] 00:00:11
————— > to 10.1.1.2 via ge-0/0/1.0
99.0.0.0/19 *[Static/5] 00:00:11
————— > to 10.1.2.2 via ge-0/0/2.0
99.0.0.0/24 *[Static/5] 00:00:11
————— > to 10.1.3.2 via ge-0/0/3.0
99.0.0.0/26 *[Static/5] 00:00:11
————— > to 10.1.4.2 via ge-0/0/4.0
Referring to the exhibit, which next-hop interface will be used to reach the 10.21.14.16 destination?
A. ge-0/0/1.0
B. ge-0/0/0.0
C. ge-0/0/3.0
D. ge-0/0/2.0
Answer: A
NEW QUESTION 364
What is the default firewall filter behavior when a term is matched but no terminating action is specified?
A. an implicit deny and the filter evaluation terminates
B. an implicit accept and the filter evaluation terminates
C. an implicit accept and the filter evaluation continues to the next term
D. an implicit deny and the filter evaluation continues to the next term
Answer: C
NEW QUESTION 365
What are three interface prefixes for a 40-gigabit interface? (Choose three.)
A. et
B. es
C. fte
D. xe
E. xle
Answer: ABE
NEW QUESTION 366
Which source of routing information is preferred by default?
A. static
B. RIP
C. direct
D. BGP
Answer: C
NEW QUESTION 367
For the interface ge-1/2/3.4, what does “ge” represent?
A. SONET/SDH
B. Gigabit Ethernet
C. Aggregated Ethernet
D. GRE
Answer: B
NEW QUESTION 368
Which word starts a command to display the operational status of a Junos device?
A. put
B. set
C. show
D. get
Answer: C
NEW QUESTION 369
……
You Can Get The Newest JN0-102 Dumps In PDF And VCE From — http://www.passleader.com/jn0-102.html (408q VCE and PDF)
Good Luck!
By the way, get part of the new Juniper 408Q JN0-102 dumps here:
https://drive.google.com/open?id=0B-ob6L_QjGLpSmYwaTA1elptOUE
Best Regards!
Congrats!!! Cleared the JN0-102 exam last weekend! Scored 90% (the passing line is 65%)!!
Though the JN0-102 test is Juniper’s entry-level certification, which is more difficult than the CISSP and CCNA exams. Hands-on Junos experience will help passing exam easily!!
I had 65 multiple-choice questions in total, most of them are NEW QUESTIONS, which are not available in those free JN0-102 dumps!
New questions FYI:
1. Which word starts a command to display the operational status of a Junos device?
2. For the interface ge-1/2/3.4, what does “ge” represent?
3. three interface prefixes for a 40-gigabit interface (et, es, xle).
4. command prompt indicates that you are in operational mode.
5. Exhibit — 10.21.14.16 destination — ge-0/0/1.0.
…etc.
Questions on this site are sure not enough for passing, NEW QUESTIONS ARE NOT AVAILABLE!
Recommend you to learn the NEWEST & VALID PassLeader JN0-102 dumps here:
http://www.juniperbraindumps.com/?s=JN0-102
(IT IS THE NEWEST VERSION — 408 Q&As!!!)
Good Luck!!!