which routes will be advertised to OSPF neighbors because of the demo policy?

user@router> show route
inet.0: 9 destinations, 9 routes (9 active, 0 holddown, 0 hidden)
+ = Active Route, – = Last Active, * = Both
10.10.10.91/32 *[Direct/0] 00:09:40
>via lo0.0
10.10.10.92/32 *[OSPF/10] 00:01:50, metric 1
>to 172.16.1.2 via ge-0/0/2.0
100.100.1.0/24 *[Static/5] 00:01:50
Reject
172.16.1.0/24 *[Direct/0] 00:06:09
>via ge-0/0/2.0
172.16.1.1/32 *[Local/0] 00:06:09
Local via ge-0/0/2.0
192.168.0.0/16 *[Aggregate/130] 00:00:06
Reject
192.168.0.0/17 *[Aggregate/130] 00:00:06

>to 172.16.1.2 via ge-0/0/2.0
192.168.50.0/24 *[Static/5] 00:00:06
>to 172.16.1.2 via ge-0/0/2.0
192.168.51.0/24 *[Static/5] 00:00:06
>to 172.16.1.2 via ge-0/0/2.0
user@router> show configuration policy-options
policy-statement demo {
term 1 {
from {
route-filter 192.168.0.0/16 longer accept;
}
then reject;
}
}
user@router> show configuration protocols ospf
export demo;
area 0.0.0.0 {
interface ge-0/0/2.0;
}

Given the configuration and routing table shown in the exhibit, which routes will be advertised to
OSPF neighbors because of the demo policy?

user@router> show route
inet.0: 9 destinations, 9 routes (9 active, 0 holddown, 0 hidden)
+ = Active Route, – = Last Active, * = Both
10.10.10.91/32 *[Direct/0] 00:09:40
>via lo0.0
10.10.10.92/32 *[OSPF/10] 00:01:50, metric 1
>to 172.16.1.2 via ge-0/0/2.0
100.100.1.0/24 *[Static/5] 00:01:50
Reject
172.16.1.0/24 *[Direct/0] 00:06:09
>via ge-0/0/2.0
172.16.1.1/32 *[Local/0] 00:06:09
Local via ge-0/0/2.0
192.168.0.0/16 *[Aggregate/130] 00:00:06
Reject
192.168.0.0/17 *[Aggregate/130] 00:00:06

>to 172.16.1.2 via ge-0/0/2.0
192.168.50.0/24 *[Static/5] 00:00:06
>to 172.16.1.2 via ge-0/0/2.0
192.168.51.0/24 *[Static/5] 00:00:06
>to 172.16.1.2 via ge-0/0/2.0
user@router> show configuration policy-options
policy-statement demo {
term 1 {
from {
route-filter 192.168.0.0/16 longer accept;
}
then reject;
}
}
user@router> show configuration protocols ospf
export demo;
area 0.0.0.0 {
interface ge-0/0/2.0;
}

Given the configuration and routing table shown in the exhibit, which routes will be advertised to
OSPF neighbors because of the demo policy?

A.
192.168.0.0/16 only

B.
192.168.0.0/17 only

C.
192.168.50.0/24 and 192.168.51.0/24

D.
192.168.0.0/17, 192.168.50.0/24, and 192.168.51.0/24

Show Hint

Leave a Reply 9

Your email address will not be published. Required fields are marked *

Luc

Luc

How about this route:
10.10.10.92/32 *[OSPF/10] 00:01:50, metric 1

It also should be advertise

Reply

Anton

Anton

“192.168.0.0/16 longer” not covers “10.10.10.92/32”

Reply

Ana Orozco

Ana Orozco

Passed JN0-102 exam last weekend with a score of 98%!

Got 70 multiple-choice questions, most of them were not difficult, they were mainly on:

1. Networking Fundamentals (Layer 2, Layer 3, IPv4 and IPv6)
2. Junos OS Fundamentals
3. User Interfaces (CLI functionality/modes/navigation/help)
4. Junos Configuration Basics (Additional initial configuration elements – NTP, SNMP, syslog, etc.)
5. Operational Monitoring and Maintenance (Show/Monitor commands, ping, traceroute, telnet, SSH, etc., Root password recovery)
6. Routing Fundamentals (Routing tables/preference/instances, Routing vs. forwarding tables)
7. Routing Policy and Firewall Filters

I learned valid JN0-102 dumps/JN0-102 VCE dumps/JN0-102 PDF dumps from here: https://tr.im/1q70g (I got that Complete Version JN0-102 dumps, 100% valid now!)

Reply

Ana Orozco

Ana Orozco

P.S. Here are some free JN0-102 dumps collection: https://tr.im/1TPco (its JN0-102 VCE dumps and JN0-102 PDF dumps are good materials for passing the JN0-102 exam)

Hope you can pass the JN0-102 exam easily! Good Luck!

Reply

Estean

Estean

Luc 10.10.10.91/32 *[Direct/0] 00:09:40
>via lo0.0

10.10.10.92 is not under the filter 192.16.xxx.xxx nets.

Reply

Guadalupe

Guadalupe

New JN0-102 Exam Questions Updated Recently (8/May/2017):

NEW QUESTION 359
Which two ping command parameters whould be used to troubleshoot MTU issues? (Choose two.)

A. ping do-not-fragment
B. ping rapid
C. ping verbose
D. ping size

Answer: AD

NEW QUESTION 360
Which command prompt indicates that you are in operational mode?

A. user @ router &
B. user @ router #
C. user @ router $
D. user @ router >

Answer: D

NEW QUESTION 361
Which keystroke combination allows users to move the cursor to the beginning of the command line without deleting text?

A. Ctrl + u
B. Ctrl + w
C. Ctrl + a
D. Ctrl + b

Answer: C

NEW QUESTION 362
What is the subnet mask for the 172.45.32.6/19 address?

A. 255.255.224.0
B. 255.255.240.0
C. 255.224.0.0
D. 255.240.0.0

Answer: A

NEW QUESTION 363
Click the Exhibit button. Referring to the exhibit, what happens when ping packets are sent to the management interface address of the local router?
user@router> show route protocol static
inet.0: 15 destinations, 15 routes (15 active, 0 holddown, 0 hidden)
+ = Active Route, – = Last Active, * = Both
99.0.0.0/17 *[Static/5] 00:00:11
————— > to 10.1.1.2 via ge-0/0/1.0
99.0.0.0/19 *[Static/5] 00:00:11
————— > to 10.1.2.2 via ge-0/0/2.0
99.0.0.0/24 *[Static/5] 00:00:11
————— > to 10.1.3.2 via ge-0/0/3.0
99.0.0.0/26 *[Static/5] 00:00:11
————— > to 10.1.4.2 via ge-0/0/4.0
Referring to the exhibit, which next-hop interface will be used to reach the 10.21.14.16 destination?

A. ge-0/0/1.0
B. ge-0/0/0.0
C. ge-0/0/3.0
D. ge-0/0/2.0

Answer: A

NEW QUESTION 364
What is the default firewall filter behavior when a term is matched but no terminating action is specified?

A. an implicit deny and the filter evaluation terminates
B. an implicit accept and the filter evaluation terminates
C. an implicit accept and the filter evaluation continues to the next term
D. an implicit deny and the filter evaluation continues to the next term

Answer: C

NEW QUESTION 365
What are three interface prefixes for a 40-gigabit interface? (Choose three.)

A. et
B. es
C. fte
D. xe
E. xle

Answer: ABE

NEW QUESTION 366
Which source of routing information is preferred by default?

A. static
B. RIP
C. direct
D. BGP

Answer: C

NEW QUESTION 367
For the interface ge-1/2/3.4, what does “ge” represent?

A. SONET/SDH
B. Gigabit Ethernet
C. Aggregated Ethernet
D. GRE

Answer: B

NEW QUESTION 368
Which word starts a command to display the operational status of a Junos device?

A. put
B. set
C. show
D. get

Answer: C

NEW QUESTION 369
……

P.S. These New JN0-102 Exam Questions Were Just Updated From The Real JN0-102 Exam, You Can Get The Newest JN0-102 Dumps In PDF And VCE From — http://www.passleader.com/jn0-102.html (408q VCE and PDF)

Good Luck!

Reply

Paulo Silva

Paulo Silva

Congrats!!! Cleared the JN0-102 exam with 90% (the passing line is 65%)!!

Though the JN0-102 test is Juniper’s entry-level certification, which is more difficult than the CISSP and CCNA exams. Hands-on Junos experience will help passing exam easily!!

Had 65 multiple-choice questions, most of them are NEW QUESTIONS, which are not available in those free JN0-102 dumps!

New questions FYI:
1. Which word starts a command to display the operational status of a Junos device?
2. For the interface ge-1/2/3.4, what does “ge” represent?
3. three interface prefixes for a 40-gigabit interface (et, es, xle).
4. command prompt indicates that you are in operational mode.
5. Exhibit — 10.21.14.16 destination — ge-0/0/1.0
…etc.

Questions on this site are sure not enough for passing, NEW QUESTIONS ARE NOT AVAILABLE!

Recommend you to learn the NEWEST & VALID PassLeader JN0-102 dumps here:

http://www.juniperbraindumps.com/?s=JN0-102

(IT IS THE NEWEST VERSION — 408 Q&As!!!)

Good Luck!!!

Reply