which routes will be advertised to OSPF neighbors because of the demo policy?

— Exhibit –user@router> show route
inet.0: 9 destinations, 9 routes (9 active, 0 holddown, 0 hidden)
+ = Active Route, – = Last Active, * = Both
10.10.10.91/32 *[Direct/0] 00:09:40
> via lo0.0
10.10.10.92/32 *[OSPF/10] 00:01:50, metric 1
> to 172.16.1.2 via ge-0/0/2.0
100.100.1.0/24 *[Static/5] 00:01:50
Reject
172.16.1.0/24 *[Direct/0] 00:06:09
> via ge-0/0/2.0
172.16.1.1/32 *[Local/0] 00:06:09
Local via ge-0/0/2.0
192.168.0.0/16 *[Aggregate/130] 00:00:06
Reject
192.168.0.0/17 *[Aggregate/130] 00:00:06
> to 172.16.1.2 via ge-0/0/2.0
192.168.50.0/24 *[Static/5] 00:00:06

> to 172.16.1.2 via ge-0/0/2.0
192.168.51.0/24 *[Static/5] 00:00:06
> to 172.16.1.2 via ge-0/0/2.0
user@router> show configuration policy-options
policy-statement demo {
term 1 {
from {
protocol static;
route-filter 192.168.0.0/16 orlonger accept;
}
then accept;
}
}
user@router> show configuration protocols ospf
export demo;
area 0.0.0.0 {
interface ge-0/0/2.0;
}
— Exhibit –Given the configuration and routing table shown in the exhibit, which routes will be advertised to
OSPF neighbors because of the demo policy?

A.
192.168.0.0/16 only

B.
192.168.50.0/24 only

C.
192.168.50.0/24 and 192.168.51.0/24

D.
192.168.0.0/17, 192.168.50.0/24, and 192.168.51.0/24

Explanation:

Show Hint

← Previous question

Next question →

Jochen SC

New JN0-102 Exam Questions Updated Recently (8/May/2017):

NEW QUESTION 358
Which two statements describe the default behavior for OSPF? (Choose two.)

A. OSPF imports all routes into the inet4.0 routing table.
B. OSPF exports all static routes into the OSPF database.
C. OSPF imports all routes into the inet.0 routing table.
D. OSPF does not export static routes into the OSPF database.

Answer: CD

NEW QUESTION 359
Which two ping command parameters whould be used to troubleshoot MTU issues? (Choose two.)

A. ping do-not-fragment
B. ping rapid
C. ping verbose
D. ping size

Answer: AD

NEW QUESTION 360
Which command prompt indicates that you are in operational mode?

A. user @ router &
B. user @ router #
C. user @ router $
D. user @ router >

Answer: D

NEW QUESTION 361
Which keystroke combination allows users to move the cursor to the beginning of the command line without deleting text?

A. Ctrl + u
B. Ctrl + w
C. Ctrl + a
D. Ctrl + b

Answer: C

NEW QUESTION 362
What is the subnet mask for the 172.45.32.6/19 address?

A. 255.255.224.0
B. 255.255.240.0
C. 255.224.0.0
D. 255.240.0.0

Answer: A

NEW QUESTION 363
Referring to the exhibit, what happens when ping packets are sent to the management interface address of the local router?
……
Referring to the exhibit, which next-hop interface will be used to reach the 10.21.14.16 destination?

A. ge-0/0/1.0
B. ge-0/0/0.0
C. ge-0/0/3.0
D. ge-0/0/2.0

Answer: A

NEW QUESTION 364
What is the default firewall filter behavior when a term is matched but no terminating action is specified?

A. an implicit deny and the filter evaluation terminates
B. an implicit accept and the filter evaluation terminates
C. an implicit accept and the filter evaluation continues to the next term
D. an implicit deny and the filter evaluation continues to the next term

Answer: C

NEW QUESTION 365
What are three interface prefixes for a 40-gigabit interface? (Choose three.)

A. et
B. es
C. fte
D. xe
E. xle

Answer: ABE

NEW QUESTION 366
Which source of routing information is preferred by default?

A. static
B. RIP
C. direct
D. BGP

Answer: C

NEW QUESTION 367
For the interface ge-1/2/3.4, what does “ge” represent?

A. SONET/SDH
B. Gigabit Ethernet
C. Aggregated Ethernet
D. GRE

Answer: B

NEW QUESTION 368
Which word starts a command to display the operational status of a Junos device?

A. put
B. set
C. show
D. get

Answer: C

NEW QUESTION 369
……

P.S. Get The Newest JN0-102 Dumps In PDF And VCE From — http://www.passleader.com/jn0-102.html (408q VCE and PDF)

Good Luck!